Indirect Output Voltage Control in Negative Output Elementary Super Lift Luo Converter Using PIC plus FLC in Discontinuous Conduction Mode  

作　　者：S. Muthukaruppasamy A. Abudhahir S. Muthukaruppasamy;A. Abudhahir(Department of Electrical and Electronics Engineering, SCAD College of Engineering and Technology, Cheranmahadevi, Tamilnadu, India;Department of Electrical and Electronics Engineering, VEL TECH MULTI TECH Dr. Rangarajan Dr. Sakunthala Engineering College, Chennai, India)

机构地区：[1]Department of Electrical and Electronics Engineering, SCAD College of Engineering and Technology, Cheranmahadevi, Tamilnadu, India [2]Department of Electrical and Electronics Engineering, VEL TECH MULTI TECH Dr. Rangarajan Dr. Sakunthala Engineering College, Chennai, India

出　　处：《Circuits and Systems》2016年第11期3685-3704,共20页电路与系统（英文）

摘　　要：In this paper, the design of a proportional integral controller (PIC) plus fuzzy logic controller (FLC) for the negative output elementary super lift Luo converter (NOESLLC) operated in discontinuous conduction mode (DCM) is presented. In spite of the many benefits viz. the high voltage transfer gain, the high efficiency, and the reduced inductor current and the capacitor voltage ripples, it natured with non-minimum phase. This characteristic makes the control of NOESLLC cumbersome. Any attempt of direct controlling the output voltage may erupt to instability. To overcome this problem, indirect regulation of the output voltage based on the two-loop controller is devised. The savvy in the inductor current control improves the dynamic response of the output voltage. The FLC is designed for the outer (voltage) loop while the inner (current) loop is controlled by the PIC. For the developed ?19.6 V NOESLLC, the dynamic performances for different perturbations (line, load and component variations) are obtained for PIC plus FLC and compared with PIC plus PIC. The study of two cases is performed at various operating regions by developing the MATLAB/Simulink model.In this paper, the design of a proportional integral controller (PIC) plus fuzzy logic controller (FLC) for the negative output elementary super lift Luo converter (NOESLLC) operated in discontinuous conduction mode (DCM) is presented. In spite of the many benefits viz. the high voltage transfer gain, the high efficiency, and the reduced inductor current and the capacitor voltage ripples, it natured with non-minimum phase. This characteristic makes the control of NOESLLC cumbersome. Any attempt of direct controlling the output voltage may erupt to instability. To overcome this problem, indirect regulation of the output voltage based on the two-loop controller is devised. The savvy in the inductor current control improves the dynamic response of the output voltage. The FLC is designed for the outer (voltage) loop while the inner (current) loop is controlled by the PIC. For the developed ?19.6 V NOESLLC, the dynamic performances for different perturbations (line, load and component variations) are obtained for PIC plus FLC and compared with PIC plus PIC. The study of two cases is performed at various operating regions by developing the MATLAB/Simulink model.

关 键 词：Negative Output Elementary Super Lift Luo Converter (NOESLLC) Discontinuous Conduction Mode (DCM) Fuzzy Logic Controller (FLC) Proportional-Integral Con-troller (PIC) 

分 类 号：F42[经济管理—产业经济]