Carbon Nanotubes Dispersion in Polymers by Two-Factor Mechanical Method  

作　　者：Sevda A. Abdullayeva Asger B. Huseynov Nahida N. Musayeva Rasim B. Jabbarov Chingiz A. Sultanov Akif D. Guliyev Rovshan F. Hasanov Sevda A. Abdullayeva;Asger B. Huseynov;Nahida N. Musayeva;Rasim B. Jabbarov;Chingiz A. Sultanov;Akif D. Guliyev;Rovshan F. Hasanov(G. M. Abdullayev Institute of Physics, Azerbaijan NAS, Baku, Azerbaijan;Research & Development Center for Hi-Technologies, MCIT, Baku, Azerbaijan;Y. Mammadaliyev Institute of Petrochemical Processes, Azerbaijan NAS, Baku, Azerbaijan)

机构地区：[1]G. M. Abdullayev Institute of Physics, Azerbaijan NAS, Baku, Azerbaijan [2]Research & Development Center for Hi-Technologies, MCIT, Baku, Azerbaijan [3]Y. Mammadaliyev Institute of Petrochemical Processes, Azerbaijan NAS, Baku, Azerbaijan

出　　处：《Advances in Materials Physics and Chemistry》2016年第11期291-304,共15页材料物理与化学进展（英文）

摘　　要：The article reports the results on the development of highly optimized two-factor mechanical method of dispersion of multiwalled carbon nanotubes (MWCNTs) in polymer matrixes with the aim of preparing of nanocomposites. The investigation of the MWCNTs and nanocomposites was carried out by using scanning electron microscopy, X-ray diffraction and Raman spectroscopy. The effectiveness of the developed method is demonstrated by comparing the electrical conductivity of MWCNT/polymer nanocomposites prepared on the basis of polydimethylsiloxane (PDMS) and the epoxy resin, using two methods-the known chemical and the proposed one-two-factor mechanical.The article reports the results on the development of highly optimized two-factor mechanical method of dispersion of multiwalled carbon nanotubes (MWCNTs) in polymer matrixes with the aim of preparing of nanocomposites. The investigation of the MWCNTs and nanocomposites was carried out by using scanning electron microscopy, X-ray diffraction and Raman spectroscopy. The effectiveness of the developed method is demonstrated by comparing the electrical conductivity of MWCNT/polymer nanocomposites prepared on the basis of polydimethylsiloxane (PDMS) and the epoxy resin, using two methods-the known chemical and the proposed one-two-factor mechanical.

关 键 词：MWCNTS Aerosol-CVD Polymer PDMS EPOXY Two-Factor Mechanical 

分 类 号：TB3[一般工业技术—材料科学与工程]