Manufacture of Single Cotton Fabric with New Composition, Specified Bend from Yarn Gathered from Local Raw Material Cotton Fiber  

作　　者：Dilshodbek Olimjonov Khasanboy Ugli Mirxojayev Mirjamol Mirkarimovich Dilshodbek Olimjonov Khasanboy Ugli;Mirxojayev Mirjamol Mirkarimovich(Department of Knitting Technology, Namangan Institute of Textile Industry, Namangan, Uzbekistan)

机构地区：[1]Department of Knitting Technology, Namangan Institute of Textile Industry, Namangan, Uzbekistan

出　　处：《Journal of Textile Science and Technology》2023年第4期244-252,共9页纺织科学与技术（英文）

摘　　要：The article created 21 types of fabrics for the new composition of dublerin. Tests of various types of weave, fiber composition and yarn count are shown in various ways. The physical and mechanical parameters of the test samples were determined and analyzed at the “Accredited Testing Laboratory for Light Industry Products” at the State Unitary Enterprise “Namangan Center for Testing and Certification”. The reason for such a low performance of the motos of number 15 produced in the scientific research work is that the linear densities of the body and the yarn are four times different, despite the weaving of the fabric. Elongation at break is also dependent on penetration.The article created 21 types of fabrics for the new composition of dublerin. Tests of various types of weave, fiber composition and yarn count are shown in various ways. The physical and mechanical parameters of the test samples were determined and analyzed at the “Accredited Testing Laboratory for Light Industry Products” at the State Unitary Enterprise “Namangan Center for Testing and Certification”. The reason for such a low performance of the motos of number 15 produced in the scientific research work is that the linear densities of the body and the yarn are four times different, despite the weaving of the fabric. Elongation at break is also dependent on penetration.

关 键 词：Weaves WARP WEFT Dublerin CANVAS Reps Surface Density Fabric 

分 类 号：TS1[轻工技术与工程—纺织科学与工程]