BIM Supporting the Development of Multitasks Related with the Structural Project  

作　　者：Alcínia Zita Sampaio Augusto Martins Gomes Paulo Manuel Sequeira Gonçalo Ferreira Azevedo Alcínia Zita Sampaio;Augusto Martins Gomes;Paulo Manuel Sequeira;Gonçalo Ferreira Azevedo(Department of Civil Engineering, University of Lisbon, Lisbon, Portugal;CERIS—Civil Engineering Research and Innovation for Sustainability, Lisbon, Portugal)

机构地区：[1]Department of Civil Engineering, University of Lisbon, Lisbon, Portugal [2]CERIS—Civil Engineering Research and Innovation for Sustainability, Lisbon, Portugal

出　　处：《Journal of Software Engineering and Applications》2023年第8期397-419,共23页软件工程与应用（英文）

摘　　要：Building Information Modelling (BIM) is a methodology focused on the centralization and sharing of the project information among all professionals involved, supported on the generation and manipulation of a three-dimensional (3D) digital BIM model. This methodology allows a close collaboration between the architect and the structural engineer and an adequate manipulation of the structural BIM model database, on the definition of multitasks. The collaboration allowed between all disciplines, avoid the detection of conflicts and data omission after in the construction place. Two BIM structural design cases were developed, using Revit as the modelling system and Robot as the structural software. Concerning the structural project the interoperability capacity between the software is still a limitation that engineers must be warned of. In the present study, the benefits and limitations identified within the communication and integration of distinct disciplines and on the development of most frequent multitasks normally related with a structural project, were considered.Building Information Modelling (BIM) is a methodology focused on the centralization and sharing of the project information among all professionals involved, supported on the generation and manipulation of a three-dimensional (3D) digital BIM model. This methodology allows a close collaboration between the architect and the structural engineer and an adequate manipulation of the structural BIM model database, on the definition of multitasks. The collaboration allowed between all disciplines, avoid the detection of conflicts and data omission after in the construction place. Two BIM structural design cases were developed, using Revit as the modelling system and Robot as the structural software. Concerning the structural project the interoperability capacity between the software is still a limitation that engineers must be warned of. In the present study, the benefits and limitations identified within the communication and integration of distinct disciplines and on the development of most frequent multitasks normally related with a structural project, were considered.

关 键 词：BIM Structural Project Communication Integration INTEROPERABILITY Multitasks 

分 类 号：TU1[建筑科学—建筑理论]