Project(2019JJ51007)supported by the Natural Science Foundation of Hunan Province,China。
In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its r...
Projects(51604069,51604049,U1508213) supported by the National Natural Science Foundation of China;Project(N162504004) supported by the Fundamental Research Funds for the Central Universities,China;Projects(2017YFB0603800,2017YFB0603801) supported by the National Key R&D Program of China
In order to provide a reliable reference for utilizing Indonesia vanadium titano-magnetite(VTM) in blast furnace(BF) economically, metallurgical properties of iron ore sinter with addition of Indonesia VTM in mixed si...
Project(51274065)supported by the National Natural Science Foundation of China;Project(2015020074)supported by the Science and Technology Planning Project of Liaoning Province,China
In the present work, the gas flow pressure drop and gas–solid heat transfer characteristics in sinter bed layer of vertical tank were studied experimentally on the basis of the homemade experimental setup. The gas fl...
Project(51574067)supported by the National Natural Science Fundation of China;Projects(2012AA062302,2012AA062304)supported by the National High Technology Research and Development Program of China;Project(N110202001)supported by the Fundamental Research Funds for the Central Universities of China
The effect of sinter basicity on softening-melting behaviors of mixed burden made from chromium-bearing vanadium-titanium magnetite(Cr-V-Ti magnetite) was investigated and the function mechanism was simultaneously ana...
Project(2011GH561685)supported by the China Torch Program
Solid wastes derived from metallurgical industries pose a significant threat to environment. The utilization and disposal of these solid wastes are the major concern in the world. Semi-coke generated in coal-based dir...
Project(51306198)supported by the National Natural Science Foundation of China
Convection heat transfer coefficient and air pressure drop in sinter layer are important factors for the design of sinter cooling craft. Due to the lack of necessary data, the two parameters are studied by experimenta...
Project(NECT-04-0748) supported by New Century Excellent Talents Program of China
In order to utilize the spontaneous accumulation of heat (SAH) reasonably and obtain the high quality sinter with low energy consumption, a lower fuel consumption modeling based on raw materials of a certain steel wor...