supported by the National Natural Science Foundation of China(grant No.21978322,21276274).
In response to the divergent understanding of double inlet cyclone performance in the literature,the effect of inlet volute wrap angle on the performance and flow field of double inlet cyclone separator was studied by...
This work was supported by Gansu Province Science and Technology Fund of China[Grant Nos.20JR10RA174,20JR5RA447,20JR10RA203];Higher Education Industry Support Plan Project of Gansu Province of China[Grant No.2020C-20];Research Subject of Key Laboratory of Fluid and Power Machinery(Xihua University),Ministry of Education[Grant Nos.LTDL2020-007,szjj2019-016];Lanzhou University of Technology Hongliu Outstanding Young Teachers’Program.
To study the unsteady flow and related energy conversion process in the volute of a pump-as-turbine(PAT)device,six different working conditions have been considered.Through numerical calculation,the spatio-temporal va...
Gansu province science and Technology Fund of China[Grant Nos.20JR10RA174,20JR5RA447];Open Research Subject of Key Laboratory of Fluid and Power Machinery(Xihua University),Ministry of Education[Grant Nos.LTDL2020-007,szjj2019-016];Lanzhou University of Technology Hongliu Outstanding Young Teachers Program。
A volute is a curved funnel with cross-sectional area increasing towards the discharge port.The volute of a centrifugal pump is the casing hosting the fluid being pumped by the impeller.In Pump-as-turbine devices(PAT)...
Supported by National Natural Science Foundation of China(Grant No.51779107);Jiangsu Provincial Natural Science Foundation of China(Grant No.BK20170548);Postdoctoral Science Foundation of China(Grant No.2017M611724);Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
The annular volute is typically used in a slurry pump to reduce the collisions between solid particles and the volute tongue and to achieve a better resistance to blocking. However, only limited studies regarding annu...
Projects(51779226,51476144)supported by the National Natural Science Foundation of China;Project(2017C31025)supported by Zhejiang Province Department Public Welfare Industrial Projects,China;Project(2016M601736)supported by Postdoctoral Science Foundation of China;Project(1601028C)supported by Postdoctoral Research Funding Plan in Jiangsu Province,China
In order to reduce pressure pulsation of vortex pumps,the mantis shrimp was chosen as biological prototype and a bionic engineering model was developed from its abdominal segment grooves.Bionic mantis shrimp groove vo...
Supported by National Natural Science Foundation of China(Grant No.51239005);Zhejiang Provincial Natural Science Foundation of China(Grant Nos.LQ15E090004,LQ15E090005);Project of Zhejiang Education,China(Grant No.Y201432222)
Improper design of volute geometry can be the main cause that leads to unsteady pressure pulsation and radial force in pumps. Therefore, it is important to understand the influence of volute geometrical parameters on ...
Supported by the Innovative Research Groups of the National Natural Science Foundation of China(No.51121004);the National Natural Science Foundation of China(No.50976026)
As one of the core components of turbocharger or micro-turbine, radial turbine has the features of small size and high rotation speed. In order to explore the design method and flow mechanism of the turbine with a vol...
The rotational frequency tone noise emitted from the automobile turbocharger is called the pulsation noise. The cause of the pulsation noise is not fully understood, but is considered to be due to some manufacturing e...
supported by the National Natural Science Foun-dation of China(Grant Nos.51239005,51009072);the National Science and Technology Pillar Program of China(Grant No.2011BAF14B04)
Numerical simulation and 3-D periodic flow unsteadiness analysis for a centrifugal pump with volute are carried out in whole flow passage, including the impeller with twisted blades, the volute and the side chamber ch...
The rotational frequency noise(also known as the pulsation noise) due to the mistuning of impeller blade rows introduced at the manufacturing stage of the impellers is observed in the small-sized centrifugal compresso...