support from the National Natural Science Foundation of China(U22A20171);the High Steel Center(HSC)at North China University of Technology and University of Science and Technology Beijing,China.
A 1∶8 physical water model was constructed to investigate the fluid flow and mixing phenomena in the basic oxygen furnace(BOF)converter.The particle image velocimetry was employed to measure the velocity distribution...
funded by the Joint Fund Project of Shaanxi(Grant No.2021JLM-32);the General Project of National Natural Science Foundation of China(Grant No.52374346).
The bottom blowing element is the key equipment to ensure the bottom blowing effect of the converter.Three types of bottom blowing elements,dispersive type(D1),double circular seam(D2)and straight cylinder type(D3),we...
supported by the National Natural Science Foundation of China(Nos.52074073 and U20A20272);the Fundamental Research Funds for the Central Universities,NEU(No.N2025017).
A cold model of top-bottom blown converter was set up to study the particle transport phenomenon and vibration performance of converter with bottom powder injection.The effect of bottom blowing flow rates,tuyere diame...
the National Natural Science Foundation of China(Grant Nos.51574021 and 51474024);the Fundamental Research Funds for the Central Universities(FRF-TP-19-031A1).
With the importance of the steelmaking industry in the economy and its negative impacts on the environment,reducing dust emissions is a vital focus in this field.Thus,the theory of dust generation in converter steelma...
In order to improve the calorific value and the recovery yield of converter gas during the steelmaking process, a novel and thermodynamically admissible process was proposed. This method involved injecting pulverized ...
The water modelling experiments of 300 t converter concerning combined blowing parameters, the number, and configuration of bottom nozzles are carried out. The results show that the arrangement of 16 bottom nozzles at...
Item Sponsored by National Key Technology Research and Development Program in 11th Five-Year Plan of China ( 2006BAE03A00 )
The steel slag in the decarburization converter is treated by the little water-spreading ( LWS ) and the heat-stewed ( HS ) methods , which is used as the furnace burden of the dephosphorization converter.The slag...
Sponsored by National Natural Science Foundation of China(50904017);Open Subject Fund of State Key Laboratory of Rolling and Automation of NEU of China(2009003)
For describing and resolving the process of chromium ore smelting reduction in a converter preferably, the coupling dynamic model was established based on the kinetic models of chromium ore dissolution and interfacial...
In view of process conditions of Vanadium Recovery and Steelmaking Plant, PanGang Group Panzhihua steel and Vanadium Co.,Ltd., and on the basis of making choice of a reasonable deoxidization process, some measures hav...
Sponsored by Science and Technology Plan Projects of Tianjin of China(07ZCKFGX03800);Science and Technology Plan Projects for CAS Supporting Tianjin Construction of China(TJZX1-YW-09)
Converter off-gas, an important energy resource for steel industries, is one of the weak points in the recov ery and utilization of secondary energy resources. To improve the level of recycling converter off-gas in st...