the Phenikaa Innovation Foundation,Vietnam(No.ĐMST.2022.01).
Thermodynamic and kinetic aspects of Sn nucleation and growth processes onto a glassy carbon electrode from SnCl2·2H2O dissolved in ethylene glycol solutions were studied.Typical reduction and oxidation peaks observe...
financially supported by the National Natural Science Foundation of China (No.52104372);the Fundamental Research Funds for the Central Universities,China (No.N2107001);the China Postdoctoral Science Foundation (No.2019M651129)。
The strength of traditional commercially pure titanium(CP-Ti) alloys often fails to meet the demand of structural materials. In order to enhance their mechanical properties, the cold-rolled CP-Ti alloys were annealed ...
supported by Jiangsu Key Laboratory Metallic Materials, China (No. BM2007204);the Fundamental Research Funds for the Central Universities, China (No. 2242016k40011)。
Edge-to-edge matching(E2EM)model was used to predict the potency of LaB_(6) as the heterogeneous nucleation substrate for primary Al_(13)Mn_(4)Si_(8) phase formed during the solidification of Al−Si−Cu−Mn heat-resistan...
the financial supports from the National Natural Science Foundation of China(Nos.U1832183,52090042,51821001)。
The effect of boron content on grain refinement of commercially pure aluminum by Al-5Ti-1B was quantitatively assessed.When the boron content is less than 0.03 wt.%,the refining performance of Al-5Ti-1B gradually is w...
financial support from the Science and Technology Project of Hunan Province,China(No.2018TP1012)。
The nucleation and growth mechanism of electrodeposited Ni−W alloy were investigated.Cyclic voltammetry(CV)and chronoamperometry(CA)were used to examine the electrochemical behavior and nucleation mechanism of the ele...
Project(2017YFB110400)supported by the National Key Research and Development Program of China。
In order to explore the influence of Cu element on the morphology evolution of the in-situ TiB2 particles, the10 wt.% TiB2 reinforced Al-5 wt.%Cu based composite was prepared by mixed salt casting. The morphology char...
Project(51574285)supported by the National Natural Science Foundation of China
To improve stability of scorodite,a method of simultaneous synthesis and in-situ coating of scorodite was proposed.Scorodite particles with polyhedral and raspberry-like morphologies were synthesized in an Fe(Ⅱ).As(...
Project(BM2007204)supported by Jiangsu Key Laboratory for Advanced Metallic Materials,China;Project(ASMA201501)supported by the Opening Project of Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology,China
The edge-to-edge matching(E2EM)crystallographic model was used to predict the orientation relationships(ORs)between LaB6 and Al.Three different possible ORs can be predicted between LaB6 and Al,which are(100)Al||(100)...
Project(20160520116JH)support by the Science and Technology Development Program of Jilin Province,China;Project supported by Key Laboratory of Automobile Materials(Ministry of Education),Jilin University,China;Project supported by PX group EPFL,Switzerland;Project(193179/I40)supported by the Research Council of Norway
The recrystallized grain structure of Al-(Mn)-Fe-Si alloys after isothermal annealing was studied by electron backscatter diffraction(EBSD) technique. Statistical correlation suggests that the frequency of forming...
Project(51374185)supported by the National Natural Science Foundation of China
The initial electrocrystallization of As-Sb alloy on glass carbon(GC)electrode in hydrochloric acid system was studiedvia cyclic voltammetry(CV)and chronoamperometry measurements.Current transients were presented in d...