the National Natural Science Foundation of China(52004191);the China Postdoctoral Science Foundation(2022M711120);the Science and Technology Research Project of Education Department of Hubei Province(B2022020);Besides,the numerical calculation is supported by High-Performance Computing Center of Wuhan University of Science and Technology.
A rotating stopper-rod technique was proposed to suppress the formation of free-surface vortex in the tundish.The large eddy simulation model coupled with volume of fluid model was developed to study the steel–slag–...
the National Natural Science Foundation of China(Grant No.51774031).
Closing a single nozzle or multiple nozzles for a temporary casting operation(fewer strands casting)was common in a tundish due to insufficient molten steel or equipment failure.However,nozzle clogging usually happens...
Continuous casting of steel involving different grades in the same casting sequence remains a challenge to billet caster operators. The intermixed composition obtained during the grade change does not meet the specifi...
A feedforward controller for the automatic regulation of chemical composition of molten steel in the tundish of a continuous casting machine is proposed in this work. The flow of molten steel inside the tundish is mod...
financially supported by the Key Special Project in the National Science & Technology Program during the Eleventh Five-Year Plan Period (No.2009ZX04014-061-7)
The metallurgical effect of a round tundish used to cast heavy steel ingots in machine works at present was evaluated through water modeling experiments. The flow control devices of the improved oval tundish, which wa...
Based on introducing equipments and technology conditions of continuous casting plant of the 4th sub-factory of general steelmaking factory of WISCO, the operation of tundish casting auto-start, control of withdrawal ...
Item Sponsored by National Natural Science Foundation of China(50904017)
The solidified crust was harmful to Al-killed steel casting using a basic tundish flux. After sampling from an actual tundish, XRD, SEM and EDX examinations were carried out to analyze the microstructure of solidified...
To meet the operation requirement of com-casting tundish for alloy steel.a forsterite based insulating board has been developed.The effects of binder ,fiber and other additives on the properties of the properties of t...