The authors are grateful to the financial support of the National Key R&D Program of China(No.2021YFB3702401);National Natural Science Foundation of China(U1937601).
Adding alloying elements is always considered as an effective method to enhance the resistance against hydrogen embrittlement in steels.Nb and V were added into 22MnB5 hot stamping steel,and then their influences on h...
Discovered in 2011,MXene becomes a most recent and active member of two-dimensional materials.Since then,the landscape of MXene grows significantly and now more than 30 different MXenes were obtained experimentally.Th...
financially supported by the National Nature Science Foundation of China (Nos.51674020 and 51571019);the National Key Research and Development Program of China (No.2016YFB0300102-5)
The increasing speed of trains necessitates the development of brake-disc materials that meet more stringent requirements.Therefore,Nb and V have been added to Cr–Mo–V steel to improve its thermal fatigue performanc...
financially supported by the National Natural Science Foundation of China (Grant Nos. 51672182, 51772197 and 51422206);the Thousand Young Talents Plan, the Jiangsu Natural Science Foundation (Grant Nos. BK20151219 and BK20140009);the Key University Science Research Project of Jiangsu Province (Grant No. 17KJA430013);the 333 High-Level Talents Project in Jiangsu Province;the Six Talent Peaks Project in Jiangsu Province;the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
Owing to their high redox activity, abundant resource, and low cost, compounds based on group VB elements(V, Nb, and Ta) are promising electrode materials for an array of energy storage devices. Moreover,their open ...
This study aims to examine the effect of replacing vanadium by niobium and iron on the tribological behavior of hot-isostatic-pressed titanium alloy (Ti-6Al-4V) biomaterial, using a ball-on-disk-type oscillating tri...
HSLA steels constitute one of the main types of steels produced worldwide by Thin Slab Direct Rolling technologies (TSDR).Among microalloying elements,the most widely used are V,Nb and Ti.These elements play different...
Item Sponsored by CITIC-CBMM Niobium Steel Research and Development Projects of China(2007RMJS-D031)
Influence of vanadium and/or niobium additions on delayed fracture behavior in high strength spring steel was studied by hydrogen permeation method and slow strain rate technique (8SRT), and its mechanism was analyz...
The influence of microalloying additions on the mechanical properties of a low-carbon cast steel containing combinations of V, Nb, and Ti in the as-cast condition was evaluated. Tensile and hardness test results indic...
This work was financially supported by Nature Science Foundation of Shandong Province (No.Y99F01).
To achieve high carbon hard-facing weld metals with both high hardness andcrack resistance, strong carbide forming elements Ti, Nb and V were alloyed into the weld metals,and their effect on the formation of carbides ...
To achieve high carbon hard-facing weld metals with both high hardness and crack resistance, strong carbide forming elements Ti, Nb and V were alloyed into the weld metals, and their effect on the formation of carbide...