This paper conducted an experimental study of droplet behavior characteristics occurring within a burning aviation kerosene droplet and on the droplet interface.The droplet combustion was performed in a quiescent high...
supported by the E-BREAK–Engine Break-through Components and Subsystems under grant agreement No.314366。
The paper concerns the phenomena of the fluid film that occurs in the bearing chamber of an aircraft engine.The geometry of the system includes two concentric cylinders,between which there is a mixture of oil and air....
The unsteady inner flow structure of a single-stage axial flow compressor under the coexisting conditions of surge and rotating stall was experimentally investigated via detailed measurements of the unsteady character...
Ice accretion is the phenomenon that super-cooled water droplets impinge and accrete on a body. It is well known that ice accretion on blades and airfoils leads to performance degradation and severe accidents. For thi...
A numerical analysis method (DSMC, Direct Simulation Monte Carlo)[1] was developed to simulate the molecular motion of rarefied gases. In the present paper, numerical approaches by the DSMC method have been carded o...
the Ministry of Education,Science,Sports and Culture,Grant-in-Aid for Scientific Research (C) 16560158
Sand erosion is a phenomenon where solid particles impinging to a wall cause serious mechanical damages to the wall surface. This phenomenon is a typical gas-particle two-phase turbulent flow and a multi-physics probl...
the National Natural Science Foundation of China Project No.50376074
The contact melting of phase change material around a moving horizontal cylindrical heat source, which descended under its own weight, is investigated in this article. A melting model under constant surface heat flux ...
Oscillatory flow in a thermoacoustic sound wave generator is described. The thermoacoustic sound wave generator plays an important role in thermoacoustic equipment. The heat exchange between the working fluid and the ...
The main aim of this work is to study numerically the influence of an external magnetic field on the solidification processes of two-component materials. Based on the continuum model of two-phase flow a mathematical m...
When a normal shock wave interacts with a boundary layer along a wall surface in supersonic internal flows and the shock is strong enough to separate the boundary layer, the shock is bifurcated and a series of shocks ...