financially supported by the National Key R&D Program of China(No.2021YFB3704000);the National Natural Science Foundation of China(Nos.52074032,51974029,52071013,and 52130407);the Beijing Natural Science Foundation(No.2232084);the Guangdong Basic and Applied Basic Research Foundation(No.2021B1515120033);the 111 Project(No.B170003);the Basic and Applied Basic Research Fund of Guangdong Province,China(No.BK20BE015).
The structure of the oxide film on FGH96 alloy powders significantly influences the mechanical properties of superalloys.In this study,FGH96 alloy powders with various oxygen contents were investigated using high-reso...
the Fundamental Research Funds for the Central Universities,China(No.FRF-IDRY-19-012).
ZrC and ZrB2 are both typical ultra-high temperature ceramics,which can be used in the hyperthermal environment.In this study,a method for preparing ultrafine ZrC-ZrB2 composite powder was provided,by using the raw ma...
supported by Suranaree University of Technology(SUT)-PhD Fund from Suranaree University of Technology;supported by the SUT and by the Office of the Higher Education Commission under NRU Project of Thailand,Suranaree University of Technology,Nakhon Ratchasima,Thailand。
NH_(4)Zn PO_(4)powders were synthesized using a simple precipitation method at room temperature.The effects of polyvinyl pyrrolidone(PVP),polyvinyl alcohol(PVA),glucose,and hexadecyltrimethylammonium bromide(CTAB)solu...
financially supported by the Fundamental Research Funds for the Central Universities of China (No. FRF-GF-17-B41)
The method of calciothermic reduction of B4C was proposed for preparing CaB6.The phase transition and morphology evolution during the reaction were investigated in detail.The experimental results reveal that Ca first ...
financially supported by the Projects of Application Technology and Development of Harbin (No. 2016RAXXJ024)
Traditional metal conductive fillers are expensive and prone to oxidation. Thus, the development of new conductive powders as fillers is urgently needed. A novel gaseous penetration technology was adopted to prepare L...
the National Laboratory SEDEAM-National Council for Science and Technology (CONACYT);ECOS M15P01 for the financial support and the facilities to develop this study
Ti6Al4V powders with three different particle size distributions(0–20, 20–45, and 45–75 μm) were used to evaluate the effect of the particle size distribution on the solid-state sintering and their mechanical prop...
financially supported by the National Natural Science Foundation of China (No. 51725401)
A method of preparing Mo2C via vacuum carbothermic reduction of MoS2 in the temperature range of 1350–1550°C was proposed. The effects of MoS2-to-C molar ratio(a, a = 1:1, 1:1.5, and 1:2.5) and reaction tempera...
Nanocrystalline powders of ZrO_2–8mol%SmO1.5(8Sm SZ), ZrO_2–8mol%GdO1.5(8Gd SZ), and ZrO_2–8mol%YO1.5(8YSZ) were prepared by a simple reverse-coprecipitation technique. Differential thermal analysis/thermogra...
supported by two French-Moroccan projects: Volubilis Partenariat Hubert Curien (PHC No.MA 09 205);Projet de Recherches Convention Internationale du CNRS (CNRS-CNRST No.w22572)
We report a simple method for preparing copper(II) molybdate(CuMoO_4) powders via a combustion-like process. A gel was first prepared by the polymerizable complex method, where citric acid was used as a complexing...
financially supported by the National Natural Science Foundation of China(No.51371167)
Amorphous Al_(72)Ni_8Ti_8Zr_6Nb_3Y_3 powders were successfully fabricated by mechanical alloying. The microstructure, glass-forming ability, and crystallization behavior of amorphous Al_(72)Ni_8Ti_8Zr_6Nb_3Y_3 pow...