financially supported by the National Science and Technology Major Project of China(No.2017-Ⅵ-0008-0078)。
Four powder metallurgy(PM)Ni-based superalloys with different Hf and Ta contents were creep-tested at 650℃ and 970 MPa,700℃ and 770 MPa,and 750℃ and 580 MPa,respectively.The effect of Hf and Ta on creep deformation...
High-purity antimony(Sb)is essential for industries like semiconductors and photovoltaics,driving research on its production.This review summarizes research advances in production and preparation techniques for high-p...
supported by grants from the National Natural Science Foundation of China(Nos.52031017,51801237);the National Key Laboratory of Science and Technology on High-strength Structural Materials in Central South University,China(No.6142912200106).
This study aims to clarify the mechanisms for the grain boundary(GB)segregation through investigating the absorption of excess solute atoms at GBs in Al−Cu alloys by using the hybrid molecular dynamics/Monte Carlo sim...
The authors are grateful for the financial supports from the project of Ministry of Industry and Information Technology of China(No.2019-00899-1-1);the Natural Science Foundation of Shaanxi Province,China(No.2021JM-060);Fundamental Research Funds for the Central Universities,China(No.3102019QD0409).
The electrochemical dissolution and passivation of laser additive manufactured Ti6Al4V were investigated through Tafel polarization,potentiostatic polarization and AC impedance measurements.The results show that the s...
Project(222173) supported by the FRINATEK project ‘BENTMAT’ from the Research Council of Norway
Al-Mg alloys are considered to have potentials to form twins during deformation because Mg can reduce the intrinsicstacking fault energy?ISFE of Al.Nevertheless,twinning has rarely been found in Al-Mg alloys even subj...
Three kinds of welds were made using low frequency pulse current variable polarity tungsten inter gas (LPVPTIG) with argon shielding, direct current TIG (DCTIG) with helium shielding and high frequency pulse curr...
A quantitative relation between the γ/γ′ and γ/Laves intermetallics was investigated with the change of chemical composition, i.e., Ti, Al and Nb in the third generation of nickel-based superalloys. The ...
Projects(51374241;51275531)supported by the National Natural Science Foundation of China;Project(CX2014B059)supported by the Innovation Foundation for Postgraduate of Hunan Province,China
Taking simultaneous variations in both particle volume and density into account, the radial mixing and segregation of binary granular bed in a rotating drum half loaded were investigated by a 3D discrete element metho...
Project(51341004)supported by the National Natural Science Foundation of China;Project(S050ITP7005)supported by the Shanghai Jiao Tong University Undergraduate Innovative Practice Program,China
Inconel 718 superalloy is widely used in the aerospace and turbine industry. Segregation of niobium appears in the laser cladding Inconel 718 superalloy and consequently influences the phase transformation during the ...
Project(51405100) supported by the National Natural Science Foundation of China;Project(2014M551233) supported by the Postdoctoral Science Foundation of China;Project(HIT.NSRIF.2015112) supported by the Natural Scientific Research Innovation Foundation in Harbin Institute of Technology,China;Project(HIT(WH)201313) supported by the Scientific Research Foundation of Harbin Institute of Technology at Weihai,China
A commercial wrought Al-Cu-Mg-Mn alloy(2024) was thixoformed based on the recrystallization and partial melting(RAP) route, and the microstructure evolution and segregation behavior during the indirect thixoformin...