云南高校图书馆联盟文献共享服务平台- STIR

STIR: 作品数：423被引量：1190H指数：13; 导出分析报告; 相关作者：钟远鸣刘定西泮智勇夏黎明孙峥更多>>; 相关机构：华中科技大学广西中医药大学山东大学广西中医药大学第一附属医院更多>>; 相关期刊：更多>>; 相关基金：国家自然科学基金中国航空科学基金中国博士后科学基金高等学校学科创新引智计划更多>>

Effect of process parameters on interfacial microstructure and mechanical properties of Al/Cu friction stir lap welding joints被引量：2: 《China Welding》2022年第4期48-58,共11页Wang Chenji Liu Song Zhu Hao Cao Zhilong Dong Shaokang; supported by the Key project of Education Department of Hebei Province(Grant No.ZD2019102)。; In this study,friction stir lap welding(FSLW)was performed for the welding test of 6061 aluminium alloy and T2 pure copper.The effect of process parameters containing rotation rate and travel speed on interfacial micr...; 关键词：friction stir lap welding Al/Cu dissimilar welding intermetallic compounds process parameters mechanical properties

Deformation analysis of a friction stir-welded thin sheet aluminum alloy joint被引量：5: 《China Welding》2020年第1期56-62,共7页Sun Hongyu Zhou Qi Zhu Jun Shi Xiaodong Sun Zhiming; The deformation characteristics of a friction stir welded thin sheet aluminum alloy joint were analyzed via numerical simulations.The simulated results were compared with the experimental results obtained for the defo...; 关键词：friction stir welding numerical simulation DEFORMATION stress distribution

Enlarged-end tool for friction stir lap welding towards hook defect controlling被引量：6: 《China Welding》2020年第1期1-7,共7页LüZongliang Han Zhenyu Zhu Dong Huang Tifang Huang Yongxian; supported by the National Natural Science Foundation of China(No.51575132)。; Hook defect is one of the trickiest issues for friction stir lap welding,which remains to be resolved.In this study,a designed pin with an enlarged-end was proposed to control the interfacial hook defect by optimizing...; 关键词：friction stir welding welding tool hook defect microstructures mechanical properties

Effect of pin rotating speed on lap shear strength of stationary shoulder friction stir lap welded 6005A-T6 aluminum alloy: 《China Welding》2016年第2期58-63,共6页Liu Zhenlei Cui Hutao Ji Shude Xu Minqiang Li Zhengwei; Stationary shoulder friction stir lap welding （SSFSLW） was successfully used to weld 6005A-T6 aluminum alloy in this paper. Effect of pin rotating speed on cross section morphologies and lap shear strength of the SS...; 关键词：friction stir lap welding stationary shoulder rotating speed lap shear failure load

Effects of pin geometry on the material flow behavior of friction stir spot welded 2A12 aluminum alloy被引量：3: 《China Welding》2015年第2期25-29,共5页李政玮岳玉梅马琳姬书得柴鹏; This work is supported by the National Natural Science Foundation of China （No. 51204111 ）, the Natural Science Foundation of Liaoning Province （ No. 2013024004 and No. 2014024008）.; A three-dimensional finite volume model was established by the ANSYS FLUENT software to simulate the material flow behavior during the friction stir spot welding （FSSW） process. Effects of the full-threaded pin and ...; 关键词：friction stir spot welding pin geometry material flow behavior numerical simulation

Numerical analysis of reverse dual-rotation friction stir welding process: 《China Welding》2013年第4期30-35,共6页石磊武传松刘会杰; A three-dimensional model of reverse dual-rotation friction stir welding （RDR-FSW） is developed to conduct the numerical simulation of heat generation and material flow during the process. The reverse rotation of th...; 关键词：numerical simulation reverse dual-rotation friction stir welding （RDR-FSW） material flow heat transfer

Analysis of material flow and heat transfer in friction stir welding of aluminium alloys被引量：1: 《China Welding》2013年第1期6-10,共5页宿浩武传松陈茂爱; A three-dimensional viscous-plastic.finite element model is established based on computational fluid mechanics. The material during the welding process is considered as non-Newtonian fluid abided by Norton-Hoff consti...; 关键词：friction stir welding material flow heat transfer modeling

Influence of tool pin profile on the interface migration of friction stir lap joints＊被引量：7: 《China Welding》2011年第4期6-11,共6页邢丽邹贵生柯黎明魏鹏; This work was sponsored by the National Natural Science Foundation of China （50875119 ） , the Aerospace Science Foundation of China （20081156009） and the Natural Science Foundation of Jiangxi Province, China （0450090）.; Friction stir lap joints of LY12 aluminum alloy plates with a thickness of 3 mm were fabricated using several tools with different pin profiles. The effects of tool pin profile on the interface migration of friction s...; 关键词：friction stir welding lap joint pin profile interface migration

Effect of process parameters on weld quality by friction stir welding of 2219 aluminum alloy: 《China Welding》2011年第2期12-16,共5页杜岩峰田志杰高培涛张彦华; In the friction stir welding （FSW） process, welding speed and tool rotation speed are two important parameters, which have great effect on the weld quality. Because neither of each parameter can ensure the welding p...; 关键词：friction stir welding process parameters weld formation tensile strength

Numerical analysis of joint temperature evolution during friction stir welding based on plastic deformation heat被引量：2: 《China Welding》2011年第1期76-80,共5页张志函李文亚韩静李京龙; 3D numerical model for friction stir welding （FSW） was developed by using ABAQUS software considering the plastic deformation heat. Effects of the rotation and welding speeds on the temperature field of FSW 2024-73 ...; 关键词：friction stir welding aluminum alloy plastic deformation heat temperature field

STIR