This paper is devoted to predict AC loss of cable in conduit conductor (CICC) which is of importance in the design of conductors. The consideration for the conductor's design and main parameters for the magnets are...
supported by the National Meg-science Engineering Project of the Chinese Government
The conductors of both the toroidal field (TF) and poloidal field (PF) coils of EAST are NiTi cable-in-conduit conductors (CICCs). The sizes of this type of CICC are 20.3 mm×20.3 mm and 18.5 mm×18.5 mm respect...
The project supported by the National Meg-science Engineering Project of the Chinese Government
A large facility for testing superconducting magnets has been in operation at the Institute of Plasma Physics of the Chinese Academy of Sciences since the completion of its construction that began in 1999. A helium re...
The superconducting joint of the NbTi Cable-in -conduit Conductor (CICC) has been developed and tested on the magnet test facility at Institute of Plasma Physics, Chinese Academy of Sciences. The CICC is composed of (...
The project supported by the Korea Ministry of Science and Technology under the KSTAR Project
The mission of Korea Superconducting Tokamak Advanced Research (KSTAR)project is to develop an advanced steady-state superconducting tokamak for establishing a scientificand technological basis for an attractive fusio...
This work was supported by the National Meg-science Engineering Project of the Chinese Government.
Under the condition of steady state, the pressure drop of coolant is mainly caused by friction along the cable. In the CICC (cable-in-conduit-conductor), helium flow within the conductor consists of two parallel inter...
A cable-in-conduit conductor(CICC ) production line was designed and constructed in Institute of Plasma Physics of Chinese Academy of Sciences (IPPCAS) by the end of 2000. It can produce a length of 600 meters and thr...
To circulate supercritical helium, a differential pressure between inlet and outlet has to be applied. A differential pressure can be generated by a refrigerating compressor which forces the coolant through cooling ch...
AC loss is one of the main issues in the design of the CICC used for PF and TF coils of superconducting tokamak. A preliminary calculation of AC loss for the designed HT-7U CICCs used for TF magnets is given in this p...
In an integrated structure low resistance CICC joint, current is conducted by outer cable strands coming into touch with the conductive Cu sole. So it is an important condition for satisfying joint performance that ea...