funded by the National Natural Science Foundation of China(Grant No.52305405,52075359);the Natural Science Foundation Research Program of Shanxi Province(Grant No.202203021222121);the Fund for Shanxi“1331Project”Key Innovative Research Team;the Chinese Postdoctoral Science Foundation(Grant No.2021M702544)。
In this study,the cold-spraying process was utilized to deposit Al particles onto an Al slab,an Mg slab,and both Al and Mg slabs to form an ultra-thin interlayer,and then the clad slabs were rolled at 400℃,developing...
financially supported by the National Nature Science Foundation of China(Grant Nos.51875443 and 51401158);the Shaanxi Co-Innovation Projects(Grant No.2015KTTSGY03-03);the Fund from The Key Lab of Guangdong for Modern Surface Engineering Technology and the Shaanxi Natural Science Foundation(Grant No.2015JQ5200).
Inter-particle bonding is an important factor affecting the property of cold sprayed metallic deposit.Because the interface bonding between particles in deposit is directly determined by plastic strain of particles du...
financially by the National Key Research and Development Program of China (No. 2016YFB1100104);the Fund of SAST (No. SAST2016043);the 111 Project (No. B08040)
In this study, friction stir processing(FSP) was employed to modify cold-sprayed(CSed) AA2024/Al2 O3 metal matrix composites(MMCs). Three different rotation speeds with a constant traverse speed were used for FS...
Cold-sprayed magnesium coatings have been little researched although cold spraying has been applied to deposit a large number of materials such as metals,metal matrix composites.In the present study,helium gas and air...
supported by the Shanghai "Qi-Ming-Xing" science and technology foundation for young scientists(No.06QB14032)
The effect of annealing treatment on the microstructures and mechanical properties of cold-sprayed Ni coating was investigated by conducting micro-hardness and tensile tests and using a normal optical microscope (OM...
Project (50171052) supported by the National Natural Science Foundation of China; Project supported by the Doctoral Foundation of Xi'an Jiaotong University, China
The microstructural features of cold-sprayed coatings were investigated using Cu, Ti and Zn feedstocks by optical microscopy, scanning electron microscopy and transmission electron microscopy to reveal the microstruct...
A direct solution analysis method, coldspray ionization (CSI) mass spectrometry (MS)[1], a variant of electrospray (ESI) MS operating at low temperature (ca. - 80 ~ 10℃), allows facile and precise characterizati...