supported by Returned Overseas Scholar Foundation of Hebei Province(Grant No.C20210321);Natural Science Foundation of Hebei Province(Grant No.E2021203106);S&T Program of Hebei(Grant No.236Z1019G)。
An online subsection cooling method for hot rolling silicon steel was designed to achieve local adjustment of transverse roll gap.Particularly,it was able to meet the requirements of edge drop of the strip by using th...
supported by the Startup Foundation of Shenyang Agriculture University(No.X2023050);the Fundamental Research Funds for the Central Universities(No.N2209006);the National Natural Science Foundation of China(No.U22A20173).
To address the current issues with the conventional slide gate system utilized in the steel teeming process,a unique electromagnetic induction controlled automated steel teeming(EICAST)technology has been developed.Co...
financially supported by the National Natural Science Foundation of China(Grant No.52004029).
After cooling in the hot rolling process,the metallographic structure of microalloyed dual-phase steel is nonuniform along the rolling direction,while the thickness fluctuation of microalloyed dual-phase steel with a ...
Financial support provided by the Fundamental Research Funds for the Central Universities of China(N2225022)is gratefully acknowledged.
The velocity distribution of sinter and gas in vertical cooling furnace(VCF)has an important influence on gas-solid heat transfer.Based on the slot model of single hopper in the VCF of Meishan Iron and Steel Co.,Ltd.,...
This work was supported by the Natural Science Foundation of Chongqing,China(Project No.cstc2020jcyj-msxmX0043);the Fundamental Research Funds for the Central Universities(Project No.2020CDJ-LHZZ-084);the National Natural Science Foundation of China(No.51974047).
In order to effectively utilize the resources and energy of molten steel slag,the variation of precipitation phase and specific heat of air quenched steel slag(AQSS)particles during continuous cooling process was inve...
The financial supports of the National Natural Science Foundation of China(NSFC 51874080,NSFC 62001312,NSFC 51774071 and NSFC 51974073);Natural Science Foun-dation of Liaoning(2019-MS-132)are much appreciated.
In recent years, the reformed coke oven gas (COG) was proposed to be used as reducing gas in a shaft furnace. A mathematical model of gas flow based on the reformed COG was built. The effects of the pressure ratio of ...
This work is supported by the National Key R&D Program of China(2017 YFB0304200);the National Natural Science Foundation of China(51734004).
The Taguchi and analysis of variance (ANOVA) methods were applied to investigate the effects of the structural and operational parameters on the heat transfer performance of a vertical sinter cooling packed bed. The a...
This work was financially supported by the National Natural Science Foundation of China(Grant No.51474090).
The crystallization behavior of blast-furnace slag under isothermal and continuous-cooling conditions was studied using the single hot thermocouple technique.The crystallization phases were obtained using FactSage sof...
This work National Science Foundation (51704019). was financially supported by the for Young Scientists of China
Cooling water provides the best protection for refractory in the blast furnace hearth. Stable and suitable water quality and abundant cooling water are the basis for long service life of the hearth. Some phenomena abo...
This work was supported by National Key R&D Program of China (Grant No. 2017YFB0304402) and the Shanghai Municipal Natural Science Foundation (Grant No. 17ZR1410400).
A novel two-step cooling experiment was established to simulate the slow cooling process of continuous annealing production line for transformation-induced plasticity (TRIP) steel. The microstructures and mechanical...