support from the National Key R&D Program of China(Grant No.2019YFC1905701);the Chongqing Young Talent Program(Grant No.cstc2022ycjh-bgzxm0172).
Low carbon development of blast furnaces is one of the key technological directions in the current development of ironmaking.Owing to the differences in the physical and chemical properties of hydrogen and carbon,hydr...
This work was supported by National Key R&D Program of China(Grant No.2019YFA0705303);National Natural Science Foundation of China(Grant No.52127807);National Science and Technology Major Project"Aeroengine and Gas Turbine"(Grant No.2017-VII-0008-0102);Independent Research and Development Project of State Key Laboratory of Advanced Special Steel,Shanghai Key Laboratory of Advanced Ferrometallurgy,Shanghai University(SKLASS 2020-Z05);the Science and Technology Commission of Shanghai Municipality(No.19DZ2270200).
The control of macrosegregation is still a difficult problem for the production of large steel ingots.In order to develop new techniques for producing low-macrosegregation and high-quality steel ingots,the effect of t...
This work was funded by the National Natural Science Foundation of China (Nos. 51474163 and 51504172).
A three-dimensional mathematical model for coupled liquid steel and liquid slag was established to study the flow and heat transfer behavior of liquid slag. Based on the volume of fluid method and the heat transfer mo...
National Natural Science Foundation of China (Grant No. 51471048 and No. U1860201);the Basic Research Program of Key Laboratory of Liaoning Province (LZ2015035);the Fundamental Research Funds for the Central Universities (N140206001 and L1 502045).
The effect of simulated welding thermal cycle on the microstructure and impact toughness of heat affected zone (HAZ) in 2205 duplex stainless steel was investigated by optical microscopy, scanning electron microscopy,...
National Natural Science Foundation of China under Grant NSFC 51471012.
The dissolution and precipitation behaviors of the carbides in carburized M50NiL steel were derived from different solution and tempering treatments.Totally four kinds of carbides of (V,Cr)-rich MC,(Mo,Fe)-rich M2C,Fe...
The effects of Mg content, inclusion size, and austenite grain size on the intragranular acicular ferrite (IAF) nucleation in heat-affected zone of steel plate after high-heat-input welding of 400 kJ/cm were investi...
Sponsored by National Natural Science Foundation of China(51174023);5th Special Funding of Postdoctoral Science Foundation of China(2012T50045)
Through the mass balance and thermal balance calculation for a typical OxyCup (or OxiCup) furnace process featuring a capacity of 380 kt/a of steel plant residuMs, the material flow and thermal flow diagrams were fi...
Item Sponsored by Fundamental Research Funds for Central Universities of China(FRF-BR-10-027B)
Aiming at the characteristics of the practical steelmaking process, a hybrid model based on ladle heat sta- tus and artificial neural network has been proposed to predict molten steel temperature. The hybrid model cou...
Item Sponsored by National Natural Science Foundation of China ( 51174253 );Fundamental Research Funds for Central Universities of China ( NCET-05-0630 );Graduate Student Degree Thesis Innovation Foundation of Hunan Province of China (1343/74333001114)
Circulating flue gas can reduce the emission of flue gas , and furthermore , it can reuse the waste heat effectively in the sintering process.Compared with conventional sintering , O2 that gets through the sintering b...
The results of numerical simulation of the mosaic embedding iron ore sintering (MEBIOS) process according to the model presented in the first part of the study are introduced. The main objective of the second part i...