financially supported by the National Training Program of Innovation and Entrepreneurship for Undergraduates(No.150046);the National Natural Science Foundation of China(Nos.51525101,51501032,51371046)。
Electrochemical and immersion tests were conducted to characterize the bio-corrosion resistance of asextruded Mg-Ca binary alloys with submicron grain size.The microstructures were further characterized by optical mic...
financially supported by the National Natural Science Foundation of China (Nos.51701200 and 11804030);the Fundamental Research Funds for the Central Universities (No.3072020CF1009);the Open Funds of the State Key Laboratory of Rare Earth Resource Utilization (Nos.RERU2020008 and 2020012);the Scientific and Technological Developing Scheme of Jilin Province (No.20200801048GH);the Jilin Scientific and Technological Development Programs (No.20200201240JC)。
A new high-pressure die-cast(HPDC) Mg–4 Al–3 La–1 Ca–0.3 Mn(ALaX431) alloy with high strength has successfully been fabricated. This HPDC alloy in peakaged state exhibits tensile yield strength(TYS) of 220 MPa at ...
financially supported by the Scientific Research Projects of Karabuk University(BAP)(No.KBUBAP-16/1-DR-075)。
Microstructure,mechanical properties and corrosion resistance of as-cast and as-extruded Mg-4 wt%Zn-1 wt%La magnesium alloys were investigated.The alloys were produced by low-pressure die casting method and extruded a...
financially supported by Beijing Natural Science Foundation(No.2142005);the National Natural Science Foundation of China(No.51401005);the Ri Xin Talents Plan of Beijing University of Technology(Nos.2014-RX-L07 and2015-RX-L11)
The effects of homogenization and isothermal aging treatment on the mechanical properties of Mg-12Gd- 2Er-1Zn-0.6Zr (wt%) alloy were investigated. The precipitated long-period stacking order (LPSO) structure and t...
financially supported by the Natural Science Foundation of Jiangxi Province(No. 20114BAB216015);Natural Science Foundation of China(No. 50671083)
An investigation on strain amplitude-dependent internal friction (IF) of an as-cast high damping Mg-7 wt% Ni alloy was carried out. In the range of our tested strain amplitudes, whether the strain amplitude is incre...
supported by the Ministry of Science and Technology "Twelfth Five-Year" Plan for Science & Technology Support (No. 2011BAE22B00)
The effects of differential speed rolling (DSR) on the texture of AZ31B magnesium alloy sheets were investigated, which were achieved by tailoring deformation temperature, reduction, and speed ratio. The results show ...
supported by the Opening Project of Jiangsu Key Laboratory of Advanced Metallic Materials (No. AMM201007);the Natural Science Foundation of Jiangsu Province of China (No. BK2010521)
The recent development of high-strength magnesium alloys is focused on the role of the strengthening phases with a novel long-period stacking-ordered (LPSO) structure. This review detailed the main factors influencing...
supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions (No. SZB-2011-6);the Key Laboratory of Advanced Welding Technology of Jiangsu Province, China(No. JSAWT-10-06)
Micro-arc oxidation (MAO) process was carried out in a dual electrolyte system of NaAlO 2 and Na 3 PO 4 on ZK60 Mg alloys to explore the effect of electric parameters including current density, frequency, duty cycle a...
Microstructure characterization, corrosion behavior, and electrochemical properties of magnesium anode materials containing 1-3 wt.% Sn in AZ61 alloy were studied by optical microscopy, X-ray diffraction (XRD), scan...
supported by the Major State Basic Research Development Program of China (Nos. 2007CB613701 and 2007CB613702);the National Natural Science Foundation of China (Nos. 50904018, 51004032 and 50974037);the Program for New Century Excellent Talents in Chinese Universities (No. NCET-08-0098);the Fundamental Research Funds for the Central Universities of China (Nos. N090409002 and N090209002);the China Postdoctoral Science Foundation (No. 20100471468)
AZ31 alloy billets of 200 mm in diameter were produced by three different processes of conventional direct chill (DC) casting, low-frequency electromagnetic casting (LFEC) and low-frequency electromagnetic vibrati...