相关期刊:《Computer Modeling in Engineering & Sciences》《International Journal of Modeling, Simulation, and Scientific Computing》《舰船科学技术》《Acta Oceanologica Sinica》更多>>
This study is financially supported by the National Natural Science Foundation of China(Grant Nos.11872136,U20A20327 and 42176241).
Moored structures are suitable for operations in ice-covered regions owing to their security and efficiency.This paper aims to present a new method for simulating the ice load and mooring force on the moored structure...
supported by the Fundamental Research Funds for the Central Universities,Dalian Maritime University,China(Grant Nos.3132019306 and 3132020116).
This paper quantitatively studies the transient dynamic response of a semi-submersible production platform with the loss of one or several positioning mooring lines.A semi-submersible platform,production risers,and po...
financially supported by the National Natural Science Foundation of China(Grant No.11072149)
A design of semi-submersible platform is mainly based on the extreme response analysis due to the forces experienced by the components during lifetime. The external loads can induce the extreme air gap response and po...
financially supported by the National Natural Science Foundation of China(Grant No.51379095)
With the floating structures pushing their activities to the ultra-deep water, model tests have presented a challenge due to the limitation of the existing wave basins. Therefore, the concept of truncated mooring syst...
Supported by China National 111 Project under Grant No.B07019
This paper addresses the need for systematic evaluation of the station keeping systems of deepwater drilling semi-submersibles.Based on the selected drilling semi-submersible configuration, the mooring systems were an...
Supported by the National High Technology Research and Development Program of China under Grant No.2006AA09A104
This paper analyzes the motion performance and mooring system of deepwater semi-submersible drilling unit in the district of the South China Sea using the MOSES procedure system. After the 3-D panel model of the unit ...