10GNYG4镉镍蓄电池组充电方法的研究  

Study on Charge Method of 10GNYG4 Cd/Ni Batteries

作　　者：宋清山[1] 宋怀田 

机构地区：[1]国营第七五五厂,河南453069

出　　处：《电池工业》1999年第5期178-179,共2页Chinese Battery Industry

摘　　要：通过对１０ＧＮＹＧ４ 镉镍蓄电池组用３ 段间歇法充电，研究了不同的充电终止电压和不同间歇时间对总充电时间、电池组容量的影响。实验结果表明：在环境温度约为１０ ℃时，第１、第２ 阶段以１６ ．０Ｖ、第３ 阶段以１５ ．５Ｖ为充电终止电压，各充电段之间间隔５ｍｉｎ 最为合适，能有效地提高充电效率并使电池组容量达到最大值，且能有效地减少充电时间和电池充电后期气体的析出，延长电池组的循环寿命。The effects of various charging terminal voltage and the discharge capacity and general charge time of the 10GNYG4 were studies by the three stage interrupt charging method.The results of experiment indicated that the most suitable charge terminal voltage of the first and the second charge stage were 16.0V,the third charge stage were 15.5V,various charge stage interrupt time were 5 minutes at 10℃.That could effectively increase charge efficiency and discharge capacity,decrease charge time and gas evolation ...

关 键 词：镉镍蓄电池组 快速充电 充电效率 间歇时间 放电容量 

分 类 号：TM912[电气工程—电力电子与电力传动]