中心区减薄的十字形试件拉伸性能研究  

Investigation of tensile formability of thinned sheet metal and cruciform specimen with thinned central test region

作　　者：韩非[1] 万敏[1] 吴向东[1] 王海波[1] 

机构地区：[1]北京航空航天大学机械工程及自动化学院,北京100083

出　　处：《塑性工程学报》2007年第6期55-58,共4页Journal of Plasticity Engineering

基　　金：国家自然科学基金资助项目(50475004)

摘　　要：中心区减薄的十字形试件拉伸,是实现板料双向拉伸变路径条件下,达到大变形以至破裂的可行试验方法,对于复杂加载路径板料屈服行为及成形极限研究,有重要的试验意义。通过标准单向拉伸试验,对比研究了板材减薄前后单向拉伸性能的变化。对于中心区方形减薄的十字形试件,进行了单臂试件和十字形试件的单向拉伸试验,验证了中心区减薄后应力计算的正确性。The cruciform specimen with thinned central region is an effective and practical device to realize the large deformation and fracture process under the different strain paths obtained by biaxial tensile test, and it has important meaning for the research of yield behavior and forming limit of sheet metal under complex strain paths. The varieties of the tensile formability of sheet metal has been compared and studied via standard uniaxial tensile test. For the cruciform specimen with square thinned central region, the uniaxial tensile tests are carried out with single-arm specimen and cruciform specimen, and the validity of the calculation of the stress in central region is validated by the experiment.

关 键 词：板料成形 成形性能 单向拉伸 十字形试件 

分 类 号：TG386[金属学及工艺—金属压力加工]