检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:Wang, Wenbin Liu, Weining Sun, Ning Li, Kefei Liu, Li
机构地区:[1] Engineering Consulting Co. Ltd., China Academy of Railway Sciences, Beijing 100081, China [2] School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China
出 处:《中国铁道科学》2012年第4期139-144,共6页China Railway Science
基 金:国家自然科学基金资助项目(51008017); 北京交通大学优秀博士生创新基金资助项目(2011YJS261)
摘 要:根据振动系统传递特性,提出一种新的环境振动预测方法——实测脉冲传递函数预测方法。通过脉冲试验测得振源与邻近建筑物内测点的振动加速度,计算得到振动系统的振动响应传递函数;将实测的地铁运营振源的振动加速度代入传递函数公式,实现对建筑物内测点的振动加速度时程、频谱、1/3倍频程和z振级的预测。应用该方法预测隧道中心楼内测点振动加速度结果表明:隧道结构与隧道中心楼内测点振动加速度传递函数峰值频段为30~50Hz,隧道中心楼内振动加速度峰值频段为40~60Hz;土层和隧道中心楼基础结构对60Hz以上频段的振动具有很强的衰减作用,楼房基础结构有效地隔断了70Hz以上的高频振动。该方法可用于预测地铁运营引起的建筑物内振动。 Based on the transfer characteristics of vibration system,the paper presents a new environmental vibration prediction method: the measured pulse transfer function prediction method.The vibration accelerations of vibration source and the measured points inside adjacent buildings were obtained via pulse excitation.The vibration response transfer function of the vibration system was calculated.The measured vibration acceleration of the vibration source induced by metro operation was substituted into the transfer function formula to predict the vibration acceleration time history,frequency spectrum,1/3 octave and z vibration level of the measured points inside buildings.This method was used to predict the vibration acceleration of the measured points inside the tunnel center building.The results indicate that the frequency range of the vibration acceleration transfer function at the measured points of tunnel structure and inside tunnel center building is 30~50 Hz,and the frequency range of the vibration acceleration inside tunnel center building is 40~60 Hz.The soil layer and the infrastructure of tunnel center building have strong attenuation effect on the vibration above 60 Hz.The building infrastructure effectively cuts off high-frequency vibration above 70 Hz.This method can be used for vibration prediction inside buildings induced by metro trains operation.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.128.172.178