YP_(2.0)-A型遥控跑车减速机构仿真及优化  

Simulation and Optimization of Reduction Institution of YP_(2.0)-A Type of Telecontrol Carriages

作　　者：郑端生[1] 沈嵘枫[1] 周新年[1] 周成军[1] 吴传宇[1] 肖明[1] 侯远票[1] 

机构地区：[1]福建农林大学交通学院,福建福州350002

出　　处：《福建林业科技》2013年第1期81-84,102,共5页Journal of Fujian Forestry Science and Technology

基　　金：国家自然科学基金资助项目(30972359);"工程索道"国家级精品课程资助项目(教高函[2010]14号);福建省高校产学重大资助项目(2010H6003);国家级大学生创新性实验计划项目(抢险救灾应急遥控索道的遥控系统研发创新实验;101038934)

摘　　要：以YP2.0-A型遥控跑车的减速机构为研究对象,应用HyperMesh中的ANSYS模块对其进行3D网格划分,并对其进行接触静力学仿真分析。结果表明:该构件的最大工作应力为123.2 MPa,满足材料的强度条件和工作要求;并进行优化设计,为进一步结构设计提供依据。The reduction institution of YP2.0-A type of telecontrol carriage was studied,3D gridding compartmentalization was finished with ANSYS models in HyperMesh.Then it completed the contact static simulation analysis.The results showed that the maximum working stress of the component arrived at 123.2 MPa,which met the strength conditions of the material and work condition requirements,and conducted the optimization design,which provided the references for further structural design.

关 键 词：减速机构 遥控跑车 有限元 强度分析 优化设计 

分 类 号：S776.3[农业科学—森林工程]