检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]湖南省电力公司科学研究院,湖南长沙410007 [2]株洲华银火力发电有限公司,湖南株洲412000
出 处:《热力发电》2013年第8期55-58,共4页Thermal Power Generation
摘 要:对某超临界600MW机组锅炉不同煤种下的机组调峰特性进行了现场试验研究。结果表明:入炉煤质的变化对机组调峰的深度、幅度、速度均有着较为明显的影响;煤质发热量对锅炉的带负荷能力影响较大,发热量越高,机组带负荷能力越强;煤质挥发分对机组的调峰深度和速度影响较大,挥发分越低,煤粉的着火和稳燃性越差;为保证机组调峰性能及运行经济性,应保证入炉煤低位发热量大于18 500kJ/kg,干燥无灰基挥发分高于15%。Field test was conducted on unit peak load regulation characteristics of a supercritical boiler under different fuel conditions.The results showed that,the depth,range and speed of the peak load regulation for this supercritical 600 MW boiler were obviously affected by the coal property;the larger the calorific value of the coal,the stronger the unit load capacity;the lower the volatile content in coal,the worse the ignition and combustion stability of coal;to ensure the unit peak load regulation performance and the economic operation,low heating value of the coal should be higher than 18 500kJ/kg,and the dry ash-free volatile content should be larger than 15%.
关 键 词:超临界机组 锅炉 煤质 发热量 挥发分 调峰特性
分 类 号:TK227[动力工程及工程热物理—动力机械及工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.31