检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:魏晗志[1] 李文连[1] 苏文明[1] 李明涛[1] 洪自若[1] 李斌[1]
机构地区:[1]中国科学院长春光学精密机械与物理研究所,吉林长春130033
出 处:《光电子.激光》2004年第6期750-752,共3页Journal of Optoelectronics·Laser
摘 要:用物理气相沉积(PVD)的方法制备了结构为ITO/m MTDATA/Bphen/LiF/Al有机异质结光估器件。在能量为4mW/cm2的365nm波长的紫外光从ITO电极方向照射下,器件的开路电压、短路电流和填充因子分别为1.3V、0.089mA/cm2和0.22,对应的能量转换效率为0.64%;在直流电压驱动下,器件表现电致发光(EL)特性,发黄色光,其阈值电压为4V,14V时达到最大亮度为1350cd/m2,研究证明它来自于有机界面的激基复合物发射。Organic heterostructure photovoltaic(PV) devices,in which 1,3,5-tris-(3-methylphenylphenylamino) triphenylamine (m-MTDATA) and bathophenanthroline (Bphen) were used as electron-acceptor and electron-donor,respectively,were fabricated by the method of physics vapor deposition(PVD).PV parameters (open-circuit voltage V_(oc),short-circuit I_(sc) and fill factor FF)of the devices were described when irradiated by a 365 nm UV-light (4 mW/cm^2).i.e., the device exhibited V_(oc)=1.3 V,I_(sc)=0.089 mA/cm^2 and FF=0.22.The power conversion efficiency of the m-MTDATA/Bphen device is 0.64 % under irradiation of UV light (4 mW/cm^2),The m-MTDATA/Bphen device also showed relative bright yellow electroluminescence(EL) emission generated from the exciplex between the two organic layer.The threshold voltager is about 4 V and the maximum brightness is 1 350 cd/m^2 at 14 V.The properties of the devices were also attributed to the strong exciplex formation in the interface between m-MTDATA and Bphen.
关 键 词:物理气相沉积 电致发光 有机异质结光估器件 激基复合物 有机界面 紫外光 能量转换 光伏特性参数
分 类 号:TN383.1[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.66