单个下颌磨牙缺失种植修复体尺寸对骨界面应力分布的影响  

Three-dimensional finite element analysis of single mandibular molar implant restoration-influence of implant sizeon stress distribution at bone interface

作　　者：李湘霞[1] 韩科[2] 卜奎晨[3] 刘莉[3] 

机构地区：[1]中山大学光华口腔医学院,讲师广东510060 [2]北京大学口腔医学院,教授北京100081 [3]北京理工大学机电工程学院,本科生北京100081

出　　处：《口腔颌面修复学杂志》2004年第4期234-236,共3页Chinese Journal of Prosthodontics

摘　　要：目的:分析单个下颌磨牙缺失采用种植修复时,种植体尺寸对骨界面的应力分布的影响。方法:采用三维有限元法,模拟单个种植体及双种植体修复单个缺失下颌第一磨牙的情况,在保证其它因素不变的条件下,分析种植体尺寸(包括种植体长度和直径)对种植体-骨界面应力分布的影响。结果:不论单种植体修复或双种植体修复单个缺失磨牙时,种植体直径变化对种植体-骨界面应力影响较大,斜向载荷时更为明显;而种植体长度对骨界面应力影响较小。结论:建议临床尽量采用直径较大的种植体修复单个缺失下颌磨牙。Objective: To study the effects of implant size in single mandibular molar implant restoration on the stressdistribution of implant-bone interface. Methods: Three dimensional finite element method was employed to simulate theloss of the 1st molar restored by single implant and two implants. The effect of implant size on stress distribution at boneinterface was observed expelling the influence of the other factor. Results: There was a negative correlation betweenimplant diameter or length and stresses in bone. But influence of implant length was minor. Conclusion: If adequate bonequantity is provided, using wider implants to restore single mandibular molar should be recommended in clinical practice.

关 键 词：骨界面 种植体 下颌磨牙 种植修复 牙缺失 影响 下颌第一磨牙 应力分布 临床 分析 

分 类 号：R783[医药卫生—口腔医学] R782[医药卫生—临床医学]