并联磨床加工螺旋槽的磨削参数设计  

Design of the flute grinding parameters to be produced with parallel grinding machine

作　　者：裴葆青[1] 罗学科[2] 陈五一[1] 黄波[1] 

机构地区：[1]北京航空航天大学机械工程及自动化学院,北京100083 [2]北方工业大学机电工程学院,北京100041

出　　处：《北京航空航天大学学报》2005年第1期94-97,共4页Journal of Beijing University of Aeronautics and Astronautics

基　　金：航空科学基金 ( 99H5 112 4);北京市科技新星计划资助项目 ( 95 5 810 0 70 0 )

摘　　要：螺旋槽的加工是回转体刀具加工的重要组成部分 ,其形状参数 (尤其是前角、槽深和槽宽 )对刀具的切削过程有很大的影响 .基于 6 UPS并联机床 ,在分析并联机床加工工艺特性的基础上 ,按照螺旋槽加工中砂轮与刀具的相对运动关系 ,建立了螺旋槽加工运动的理论模型 ,对可能影响螺旋槽成形的因素进行了全面分析 .进而建立了一个仿真模型 ,可以对所有的磨削参数进行快速的定量设计和优化 ,主要包括砂轮偏转角度、砂轮厚度、砂轮轴向平移位置和螺旋槽深度 。The flute machining is important to produce a milling cutter. The geometric parameters (especial its rake angle, flute depth and flute width) have essential influence on the performance of the tool. Using a 6-UPS parallel machine, based on analyzing its special machining and structure features, general analysis was given for all factors which will influence of flute forming, and according to the motion relation between grinding wheel and the milling cutter, a simulation model system was established, that can optimize and quantitative design all of the parameters quickly. These parameters include the grinding wheel deflexion, the grinding wheel thickness, the grinding wheel offset position along the axes direction, and the flute depth. These parameters have been verified by experiments.

关 键 词：机械工程 刀具 磨削 并联机床 螺旋槽 

分 类 号：TG706[金属学及工艺—刀具与模具]