超声波雾化喷嘴的试验研究  

An Experimental Study of Ultrasonic Atomizer

作　　者：刘鸿[1] 王家骅[2] 

机构地区：[1]江苏工业学院机械工程系,江苏常州213016 [2]南京航空航天大学

出　　处：《江苏工业学院学报》2005年第1期31-33,共3页Journal of Jiangsu Polytechnic University

基　　金：江苏工业学院科技基金资助

摘　　要：研究了超声波喷嘴的结构和加工工艺对喷嘴雾化性能的影响,得到喷嘴的最佳结构参数和加工工艺并测定该喷嘴的雾化特性。试验表明,该喷嘴能满足雾化要求,雾化剂占水量的15%以下,水珠平均直径在60～70μm范围。A study of the structure of ultrasonic atomizer and the influence of the performance of nozzle atomization due to process technics is carried out.The best structure parameters and process technics are gained and the performance of atomization is determined.The experiment shows that the nozzle can meet the requests that atomization medium is less than 15 percent of the water and the SMD of the water is within 60-70μm.

关 键 词：超声波 喷嘴 雾化 

分 类 号：TF054[冶金工程—冶金物理化学]