植物秸秆模压成型流变特性的试验研究  

An Experimental Study on the Reological Properties of the Cornstalk in the Mold Press Process

作　　者：郭康权[1] 赵东[1] 杨中平[1] 高爱民[1] 杨林青[1] 

机构地区：[1]西北农业大学机械与电子工程学院,青岛迅捷电子有限公司

出　　处：《西北农业大学学报》1995年第3期11-15,共5页Journal of Northwest Sci-Tech University of Agriculture and Forestry（Natural Science Edition)

基　　金：陕西省自然科学基金

摘　　要：植物秸秆在圆锥形模具中模压成型时的流变特性受压缩力、温度、模具锥度、原料粒度等条件的影响。试验结果表明：随着压缩力和模具锥度增大、原料粒度减小、加热温度升高，成型物高度增高、底厚变薄。The reological properties of cornstalk in the mold press process are af-fected considerably by the compression load,the temperature,the conieal angle of themould and the particlesize of the materials. The results of the experiment shows tbatwith the increase of the compression load and the conical angle of the mould,and thatwith the increase of thetemperature,the formed cup height increases while the bottomthickness thins down.

关 键 词：植物秸秆 模压成型 流变特性 废弃物 

分 类 号：S216.2[农业科学—农业机械化工程]