中密度纤维板切削力的研究  

THE STUDIES OF CUTTING FORCE IN MEDIUM DENSITY FIBRE(MDF) BOARD

作　　者：曹平祥[1,2] 郝宁仲[1,2] 王瑾[1,2] 

机构地区：[1]南京林业大学 [2]福州人造板厂

出　　处：《南京林业大学学报（自然科学版）》1996年第2期75-79,共5页Journal of Nanjing Forestry University：Natural Sciences Edition

摘　　要：用二次回归正交组合设计法安排试验，采用二次回归数学模型分别拟合单位宽度的切削力Ｆ、法向力Ｆ，与刀具磨损ｂ、刀具前角ｙ及切削厚度ａ之间的关系。试验分析表明Ｆ，的二次回归曲线方程在水平ａ＝０．００１下显著。Ｆ的二次回归曲线方程在水平ａ＝０．１下不显著。The experiments of the studies were arranged with the Perpendicular label of Twice Regression. Horizontal Cutting force (F x) and perpendicular cutting force( F y ) were separately measured by two piezoelectric transducers. It was found that the regression equation among F x , Tool Wear, Rake and Cutting Depth would be very outstanding in the level of 0 001, but it was appearly confirmed that the regression equation among F y , Tool Wear, Rake and Cutting Depth was not outstanding under the level of 0 1. It was apparent that F x increased with Cutting Depth and Tool Wear, and decreased with Rake. Moreover, the effect of Cutting Depth was more than Tool Wear and Rake. It was ascertained that F y in small Tool Wear would be less than one in large Tool Wear when Rake equaled 10 degreses, but F y was hardly affected by Tool Wear when Rake was 36 66° degress.

关 键 词：中密度 纤维板 切削力 

分 类 号：TS653.6[轻工技术与工程] TS652