检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]上海汽车工业(集团)总公司汽车工程研究院,上海200030
出 处:《锻压技术》2005年第6期18-21,共4页Forging & Stamping Technology
摘 要:通过数值模拟和实验,研究了压边圈结构对冲压成形过程中压边应力分布的影响,建立埋入式压边应力测量系统,对冲压过程中压边圈与板料之间的接触应力进行了测量,结果表明压边圈结构的变化对压边圈和板料之间的接触应力有显著影响,通过合理设计压边圈结构,可以实现在压边圈不同部位施加不同的压边应力,从而改善冲压件的成形性能。In this paper, the effect of the structure of blank-holder on the distribution of blank-holder stress during sheet metal forming has been investigated by numerical simulation and experimental measurement method. The embedded measurement system of contact stresses is established. The results indicate that the contact stresses depends on the structure of blank-holder and the different distribution of contact stresses around the blank-holder can be obtained by reasonably designed blank-holder and the formability of stamped part can be improved.
分 类 号:TG386.32[金属学及工艺—金属压力加工]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200