增压机工作装置的模型分析和运动仿真  

Model Analysis and Movement Simulation About the Device of Supercharger

作　　者：刘军[1] 赵东辉[1] 张慧[1] 高献坤[1] 乔伟杰[1] 郭鹏[1] 

机构地区：[1]河南农业大学机电工程学院,河南郑州450002

出　　处：《压缩机技术》2005年第6期40-43,共4页Compressor Technology

摘　　要：探讨了虚拟制造技术的意义,介绍了Pro/E、Ansys和Adams 3种软件的功能和用途,并采用Pro/E建立增压机工作装置参数化实体模型,以此为基础,建立运动学模型,对工作装置进行运动仿真。并将模型的连杆部分导入Ansys分析软件进行有限元受力分析,活塞和连杆部分导入Adams软件中进行动力学分析,分析结果为产品优化提供了依据。This article talks about the meaning of Virtual Manufacturing, and introduces the functions and purposes of Pro/E, Ansys and Adams. Adopting Pro/E set up the parameter entity model of the Supercharge device. Based on this, set up kinematics model and simulate the device to exercise. Using the Ansys software do force analysis in finite element method to the connecting rod which are loaded in to Ansys software, analyze the kinetics of the piston and connecting rod which are loaded into adams software. The analysis result can offer the basis on which the products are optimized.

关 键 词：增压机 运动仿真 有限元分析 

分 类 号：TH16[机械工程—机械制造及自动化] TG68[金属学及工艺—金属切削加工及机床]