小型车用换热器的数值模拟与优化  

Numerical Analysis and Optimization of a Small Vehicle Heat Exchanger

作　　者：孙登兴[1] 邓兆祥[1] 王攀[1] 罗虹[1] 

机构地区：[1]重庆大学机械传动国家重点实验室,重庆400030

出　　处：《重庆大学学报（自然科学版）》2006年第4期50-53,共4页Journal of Chongqing University

基　　金：重庆市科技攻关项目(2002-6644)

摘　　要：应用CFD计算流体动力学方法对换热器的换热特性、空气流动特性进行了全面分析,得到了换热器温度场、压力场和流场分布情况.对换热器实施了减少管束的数目、减小折流板尺寸、增大壳侧出口直径和增大换热管直径等改进措施,改进后换热器壳侧的阻力损失降低32.3%,为103.2 Pa,同时出口温度为130 K,仍然满足换热要求.表明采用数值模拟方法对换热器进行研究开发可以获取换热器内任意点的温度、压力和流速等详细信息,而且可以了解结构参数变化对换热器流场和温度场的影响的显著优点,为换热器的优化设计提供了新的方法.This paper analyzes the fluid flow and heat transfer of the heat exchanger, and obtainsd the distribution of fluid field, heat field and pressure field in heat exchanger. According the analysis result, some modify measure is adopted, such as decreasing the number of tube bundle, the size of baffle plate and increasing the diameter of exchange heat tube. In the new heat exchanger, the resistance decreased 32.3%, is 103.2 Pa and the temperature of the exit is 130 K. The new heat exchanger satisfies the requirement of exchanging heat. The study indicates that adopting the numerical simulation method could get temperature, pressure and fluid - velocity of anywhere of the heat exchanger, and understand effecfing of structure parameter on fluid flied and heat flied of the heat exchanger. Therefore, it provides a new method for optimization design of heat exchanger.

关 键 词：换热器 数值模拟 耦合分析 CFD 

分 类 号：U48[交通运输工程—载运工具运用工程]