靶基距对C/Cr复合镀层厚度影响的研究  

The Study About Effect of Substrate-to-target Distance on the Thickness of C/Cr Composite Coatings

作　　者：邓凌超[1] 栾亚[1] 张国君[1] 蒋百灵[1] 

机构地区：[1]西安理工大学材料科学与工程学院,西安710048

出　　处：《中国表面工程》2006年第1期47-50,共4页China Surface Engineering

基　　金：国家高技术研究发展计划(863计划);闭合场非平衡磁控溅射离子镀镀膜装备的研究开发(2005AA33H010)

摘　　要：以四靶闭合场非平衡磁控溅射方法制备C/Cr镀层,用球痕法测量镀层厚度,研究了镀层厚度及均匀性随靶基距的变化规律,并探讨了靶基距影响镀层厚度的机理。结果表明:靶基距对镀层厚度有明显影响;镀层厚度随靶基径向距增大而显著减小,随靶基轴向距的增加变化不大;试样放置位置越靠近真空室中心区域,镀层厚度均匀性越好;磁场空间分布和粒子迁移中的散射碰撞是导致靶基距影响镀层厚度的主要原因。The effect of substrate-to-target distance on the thickness of carbon/chromium coating uaually occurred when the coating was deposited by a Teer UDP450 unbalanced magnetron sputtering deposition system. The thickness of the coatings was measured by a Tecr BC-1 ball crater device. The relation between thickness of coating and substrate-to-target distance was investigated, and the mechanism about the effect of substrate-to-target distance on the thickness of coating was discussed. The results indicated that substrate-to-target distance shows a great effect on the thickness of C/Cr coating, the thickness of coatings is decreased obviously with the increase of substrate-to-target radial distance and has a little change with the increase of substrate-to-target axial distance, the uniformity of thickness of C/Cr coating can be improved gradually when the substrate-placed position is close to central area of working chamber. The dominant factors causing the effect of substrate-to-target distance on the thickness of coating are the distribution of magnetic field in the working chamber and the gaseous particle scattering collision during thcir movement.

关 键 词：非中衡磁控溅射 C/Cr镀层 靶基距 厚度 

分 类 号：TG174.444[金属学及工艺—金属表面处理]