N-辛基-O-硫酸酯基壳聚糖质量分析  

Analysis of N-octyl-O-sulfate Chitosan

作　　者：邱娟[1] 杭太俊[1] 张灿[2] 

机构地区：[1]中国药科大学药物分析室,江苏南京210009 [2]中国药科大学新药研究中心,江苏南京210038

出　　处：《药学进展》2006年第6期267-270,共4页Progress in Pharmaceutical Sciences

基　　金：国家科技部863专项资助项目(2004AA2Z3232);国际科技合作重点项目(2005DFA30350)

摘　　要：目的:建立N-辛基-O-硫酸酯基壳聚糖质量分析方法。方法:采用高效凝胶色谱法测定分子质量,湿法消化后重量法测定磺化度(总硫酸根含量),EDTA返滴定法测定游离硫酸根。结果:3批样品重均分子质量分别为9.7×105,8.9×105,7.4×105;数均分子质量分别为2.0×105,1.8×105,1.6×105;总硫酸根含量约为32%;游离硫酸根含量均小于1%。结论:质量分析指标适宜,结果准确,适用于N-辛基-O-硫酸酯基壳聚糖的质量控制。Objective： To establish quality control method for N-octyl-O-sulfate chitosan. Methods： HPGPC was used for the determination of molecular weight. The degree of sulfonic substitution was determined by gravimetric analysis of total sulfate after digestion with nitric acid and hydroperoxide. The content of free sulfate was measured by reverse titration with EDTA. Results： The weight-average molecular weights of three batches of the substituted chitosan were 9.7×10^5, 8.9 ×10^5 and 7.4×10^5, respectively. The corresponding number-average molecular weights were 2.0×10^5, 1.8×10^5 and 1.6×10^5, respectively. The degree of O- sulfate substitution （total sulfate） was about 32% and the content of free sulfate was less than 1%. Conclusion： The test and assay methods for N-octyl-O-sulfate chitosan are suitable and accurate. They can be used for the quality control of N-octyl-O-sulfate chitosan.

关 键 词：N-辛基-O-硫酸酯基壳聚糖 分子质量 硫酸根 

分 类 号：TQ28[化学工程—有机化工]