皇竹草KP-AQ与Soda-AQ法蒸煮性能比较  

A comparison between Soda-AQ and KP-AQ cooking characteristics of hybrid giant napier

作　　者：张辉[1] 蔡兆斌[2] 

机构地区：[1]南京林业大学 [2]镇江金河纸业有限公司,江苏镇江212006

出　　处：《中华纸业》2006年第7期51-54,共4页China Pulp & Paper Industry

基　　金：华南理工大学制浆造纸工程国家重点实验室开放基金资助项目(编号200308)

摘　　要：研究并比较了皇竹草Soda-AQ与KP-AQ法蒸煮制浆综合性能,得出了两种蒸煮方法主要蒸煮工艺参数用碱量A、最高温度C、保温时间T、硫化度S与浆料得率Y和卡伯价K间的回归方程。较佳蒸煮条件和结果分别为A17%、C158℃、T20min、Y49.96%、K15.2和A18%、C160℃、T30min、S15%、Y51.54%、K13.9;两种浆CEpH法均能漂至白度>82%ISO;蒸煮、漂白浆料纤维长度分布小于等于100目的>80%～85%;打浆度43、42°SR时,撕裂指数7.5、7.2mN·m2/g,耐破指数3.28、3.10kPa·m2/g,裂断长5.22、5.17km;两种蒸煮方法均较好地适用于皇竹草,但综合前者更优。A comparison of the comprehensive performance of Soda-AQ and KP-AQ cooking and pulping of hybrid giant napier was made. The results show that： the regression equations of the major cooking technological parameters such as the alkali charge A （ Na2O in %）, the maximum temperature C （℃）, holding time T（min）, sulphidity S （%） and the pulp yield Y （%） and Kappa number K in the Soda-AQ and KPAQ cooking processes are respectively Y=-10^4.807/（A ^0.192 T^ 0.007 C ^1.305）, K=10^7. 758/（A ^1. 388 T^ 0. 088 C ^2.174） and Y=10^3.194 S ^ 0.004/ （A^ 0. 162 C ^0. 578 T^ 0.003）, K= 10^5. 985/（ S ^0. 007 A^ 0. 591 C ^1.721 T^ 0.141 ）; the preferred conditions of cooking and result were respectively A17%, C158℃, T20min, Y49.96%, K15.2 and A18%, C160℃, T30min, S15%, Y51.54%, K13.9,CEpH process can both bleach the pulp to higher than 82 %ISO in brightness; For the cooked and bleached pulp, fiber with the length distribution over 100- mesh can be more than 80%- 85%; At the beating degree of 42 and 43°SR, the tear index was 7.5, 7.2mN. m^2/g, the bursting index was 3.28, 3.10kPa. m/g, and the breaking length was 5.22, 517km; The two methods can both be applicable to hybrid giant napier but KP-AQ process is better as a whole.

关 键 词：皇竹草 KP—AQ Soda—AQ 蒸煮特性 回归方程 蒸煮工艺条件 

分 类 号：TS749[轻工技术与工程—制浆造纸工程]