土方机械落物保护结构动态仿真及试验  

Impacted Dynamic Simulation and Test of Falling Object Protective Structures of Earth-machinery

作　　者：冯素丽[1] 王国强[1] 李春[1] 葛树文 

机构地区：[1]吉林大学机械科学与工程学院 [2]中国一汽集团轿车销售公司

出　　处：《农业机械学报》2006年第7期142-145,共4页Transactions of the Chinese Society for Agricultural Machinery

基　　金：国家"863"高技术研究发展计划资助项目(项目编号:98230103)

摘　　要：简述了土方机械落物保护结构的特点及性能要求,建立了落物保护结构受瞬态冲击响应的有限元结构动力学方程并提出了求解算法。以某装载机落物保护结构为例,建立了落物保护结构的非线性有限元模型,讨论了有限元网格划分及载荷施加方法,分析了落物保护结构的主要设计参数对冲击点最大位移及落锤速度和加速度的影响,并给出了更合理的结构。在试验台上对该装载机落物保护结构进行了落物冲击试验,试验结果和仿真结果吻合较好。落物保护结构的动态仿真为结构的设计提供了依据。The characteristics and the performance requirement of falling object protective structures （FOPS） of earth-machinery are introduced in this paper. The dynamic equations of the impacting process of the falling object protective structure are established, and the solving algorithm of nonlinear dynamic simulation is put forward. A typical FOPS of wheel loader is taken as an example, the nonlinear finite element model of the FOPS is set up and the meshing technique and loading method are discussed. Through numerical simulation, the influence of different design parameters on the largest plastic deformation of the top cover and on the drop hammer＇s velocity and acceleration are analyzed. The falling object experiment is carried out on the test equipment, the simulation results are accord well with those of the experiment. The dynamic simulation of FOPS will provide the basis for the structural design.

关 键 词：铲土运输机械 落物保护结构 瞬态 非线性 有限元法 

分 类 号：TH243[机械工程—机械制造及自动化]