检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈雅琴[1] 张宏光[1] 冯忠居[1] 谢永利[1]
机构地区:[1]长安大学桥梁与隧道陕西省重点试验室,西安710064
出 处:《工程地质学报》2006年第4期531-536,共6页Journal of Engineering Geology
基 金:交通部西部交通建设科技项目(200131800017)
摘 要:竖轴向承载力是桩基础设计的重要参数,现场静载试验是目前确定桩基承载力的主要手段之一。本文依托黄陵—延安段高速公路洛河特大桥试桩工程,通过对原有工程桩施加预应力,形成了以工程桩为锚桩的锚拔体系。加载过程中试桩应力、锚桩应力及桩顶位移测试,结果表明,结合预应力技术,以工程桩作为锚桩构成桩基础静载试验的锚拔体系是可行的,同时提出了施加预应力大小的原则、方法以及确保后期曾作为锚桩的工程桩有足够承载能力应采取的必要措施。Pile bearing capacity is an important parameter in foundation design. One of the key means to determine the pile bearing capacity is the conventional static load test at construction site. A pile testing project at Luohe Bridge along Huangling - Yan'an Highway employs the piles of the bridge as the anchor piles. The anchor piles are stressed to form an anchor - pulling system. The test pile stress, the anchor pile stress and the displacement on top of the pile measured during the loading test show that it is feasible for the anchor - pulling system to use pre - stress technique and to take the piles of bridge as anchor piles for the static pile load test. At the same time, the equation is developed to determine the value of prestressing force applied to the anchor piles. Essential measures to make sure that those piles still have sufficient bearing capacity for the bridge after being used as anchor piles are also put forward. The results of this paper are of significance to shorten the construction period, reduce the test cost and broaden the application scope of prestressing techniques.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.179