试剂的浓度和加入顺序对水相合成金纳米颗粒的影响  

Effects of Reagent Concentrations and Mixing Procedure on Au Nanoparticles Prepared in Aqueous Solution

作　　者：彭菊村[1] 卢强华[2] 吴波英[1] 

机构地区：[1]孝感学院物理系,湖北孝感432000 [2]华中科技大学物理系,湖北武汉430074

出　　处：《稀有金属》2006年第4期552-555,共4页Chinese Journal of Rare Metals

基　　金：湖北省教育厅经费支助项目(鄂教科[2003]5号)(2003A004)

摘　　要：在金溶胶的经典水相合成法基础上对合成工艺进行了研究,探讨了试剂的浓度、加入顺序以及用量对金溶胶特征参数的影响。结果表明:在采用经典方法制备金溶胶时,出现附着和团聚物,粒子的单分散性和形态较差;将试剂加入顺序颠倒以及将两种试剂混合再加热所制备的金纳米颗粒的形态和单分散性较好,基本无团聚物,且产率高。说明了试剂加入顺序、浓度大小(尤其是柠檬酸三钠)及均一性影响金纳米颗粒的品质,而金溶胶的稳定性与试剂加入顺序更是直接相关。The effects of reagents concentrations and mixing procedure on the characteristics of gold suspensions were discussed, and an appropriate quantity of reagents added in synthetic process was suggested. It is found that Au nanoparticles produced by the classical synthetic method （i. e. the first method） has poor monodispersity and the aggregates occur during the preparation. Thus the reversal reagent addition sequence（i, e. the second method） and the mixture of the reagents before reaction （i. e. the third method） were used for the production of colloidal gold, which have superiority in monodispersity, shape and output over the first method. It indicates that addition sequences, reagents levels （especially citrate levels） and its uniformity have influence upon the quality of gold particles. While the stability of the gold colloids have direct correlation with the mixing procedure.

关 键 词：金溶胶 单分散性 金纳米颗粒 合成工艺 

分 类 号：O64[理学—物理化学]