静电纺丝素纳米纤维工艺影响分析  

Analysis of Process Influence on Electrospun Silk Fibroin Nanofibers

作　　者：尹桂波[1] 张幼珠[2] 耿琴玉[1] 

机构地区：[1]南通纺织职业技术学院,南通226007 [2]苏州大学材料工程学院,苏州215021

出　　处：《南通纺织职业技术学院学报》2006年第3期1-5,共5页Journal of Nantong Textile Vocational Technology college

基　　金：江苏省高校重点实验室开放基金项目(编号S8115033);南通纺织职业技术学院自然基金项目(编号000274).

摘　　要：静电纺丝法可获得纳米级丝素纤维,后者可广泛应用于组织工程、伤口包覆及药物控释等.以甲酸为溶剂,溶解再生丝素室温干燥膜进行静电纺丝.根据静电纺丝原理,研究了质量分数、电压和电场等工艺参数对纤维形态的影响.结果表明:纤维直径与质量分数具有高度显著线性关系,纤维直径随质量分数的升高而增大;纤维直径开始随电压的增加而变小,之后变大;相同电场强度下,高电压/长距离式电场制备的纤维直径小.Electrospinning can ing and drug controlled release. prepare silk fibroin nanofibers that can The regenerated silk fibroin air-dried be used in tissue engineering,wound covermembrane was dissolved in formic acid and electrospun. Process influences on nanofibers morphology such as concentration, voltage and electric field were investigated according to electrospinning theory. The results showed that fiber diameter represented highly remarkable linear relation to concentration, increasing with solution concentration ;decreased firstly and then increased with its voltage. Higher voltage/longer distance electric field can produce smaller fiber diameter.

关 键 词：静电纺丝 再生丝素蛋白 工艺参数 形态结构 

分 类 号：TS102.512[轻工技术与工程—纺织工程]