粘结固体润滑膜的摩擦学特性研究  

Study of Tribological Characteristics of Bonded Solid Lubricant Film

作　　者：葛新建[1] 孙建林[1] 范慧莉[2] 

机构地区：[1]北京科技大学材料科学与工程学院,北京100083 [2]北京科技大学化学系,北京100083

出　　处：《润滑与密封》2006年第10期134-136,共3页Lubrication Engineering

基　　金：青海省科技攻关项目(2004-Z-612)

摘　　要：采用2种不同的固体润滑粉末(石墨和二硫化钼)分别与溶剂、粘结树脂组合制得粘结固体润滑剂,涂敷于钢板表面成膜,然后对得到的粘结固体润滑膜的润滑性能、物理化学性能和耐磨性能进行了测试。结果表明:粘结固体润滑剂中的固体粉末含量越多、颗粒越细,润滑膜的润滑性能越好,但固体粉末含量的增加影响了润滑膜的干燥时间,附着力、柔韧性和耐冲击性能也变差;只有当润滑剂中加入了适量固体粉末后,得到的润滑膜的减磨效果最佳。MoS2-based and graphite-based solid lubricating coatings with solvent, binder and other additives were prepared and the tribological behaviors were comparatively investigated including coefficient of friction, fretting wear and other physical/chemical capabilities. The result shows that the more solid powder and the smaller powder granule, the better lubrication is gained;however, drying time, flexibility, adhesion and resistance of lubricating film varies with the increase of solid powder content;when the solid powder content is appropriate, the fretting wear of lubricating film is optimal.

关 键 词：粘结固体润滑膜 石墨 二硫化钼 润滑性能 耐磨性 

分 类 号：TH117.2[机械工程—机械设计及理论]