界面和择优取向对TiN/ZrN纳米多层膜硬度变化的影响  

Effect of interface and preferred orientation on the hardness of TiN/ZrN multilayers

作　　者：徐晓明[1] 王娟[1] 赵阳[1] 张庆瑜[1] 

机构地区：[1]大连理工大学三束材料改性国家重点实验室,大连116024

出　　处：《物理学报》2006年第10期5380-5385,共6页Acta Physica Sinica

基　　金：国家自然科学基金委员会-中国工程物理研究院联合基金(批准号:10476003)资助的课题.~~

摘　　要：利用射频反应磁控溅射方法,制备了调制比约为4,调制周期不同的一系列TiN/ZrN纳米多层膜.利用X射线衍射仪(XRD)、高分辨电子显微镜(HRTEM)和纳米压痕仪(Nanoindentation)对多层膜的调制结构、界面状态和力学性能进行了表征.研究结果表明TiN/ZrN多层膜具有很好的调制结构,但是在TiN层和ZrN层之间存在一定厚度的界面混合层.力学性能分析表明:当调制周期小于15nm时,TiN/ZrN多层膜的硬度介于单一TiN和ZrN薄膜的硬度之间;当调制周期为15·24nm时,硬度达到最大,但随着调制周期增加,多层膜的硬度基本上保持为常数.分析了TiN/ZrN多层膜硬度变化的机制,认为界面厚度和择优取向是导致硬度变化的主要原因.TiN/ZrN multilayers were fabricated using reactive radio-frequency magnetron sputtering methods. X-ray diffraction analysis was used to determine the modulation structure of the muhilayers. Using high-resolution transmission electronic microscopy, the interface was found to be a mixed layer of 2-3 nm in thickness. The nano-indentation measurement showed that the hardness of TiN/ZrN multilayers varied with the modulation period. Both the hardness and elastic modulus had their maximums for the muhilayer with a modulation period of about 15.24 nm. The enhancement in hardness is discussed with different hardening mechanisms. The interface states and preferred orientation are assumed to be the main causes of the enhancement of TiN/ZrN multilayers in hardness.

关 键 词：TiN/ZrN多层膜 界面宽度 择优取向 硬度变化 

分 类 号：O484.2[理学—固体物理]