高压油管密封锥头镦制成形研究  

Research on the Upset Forging for Seal-Cone of High Pressure Fuel Pipe

作　　者：吴金平[1] 杨英丽[1] 林桥[1] 殷京欧[1] 赵恒章[1] 赵彬[1] 苏航标[1] 郭荻子[1] 

机构地区：[1]西北有色金属研究院,陕西西安710016

出　　处：《稀有金属快报》2006年第11期32-34,共3页Rare Metals Letters

摘　　要：研究了304L奥氏体不锈钢高压油管密封锥头的镦制成形工艺,冷镦、温镦及热镦的试验结果表明:锥头密封锥面裂纹的形成对镦制温度较为敏感,冷镦及热镦均易在锥头凸台上产生纵向裂纹,通过温镦可以有效消除304L不锈钢管锥头镦制过程中裂纹的产生;镦制过程中锥面上的环形内凹陷与材料的不均匀变形有关。The upset forging processes, including hot, warm and cool upset forging, have been studied in this paper. The results show： deformation rate of cold working has little effect on the parameters of consequnt process after annealing; the generation of crack on the face of the seal-cone is very sensitive to the temperature during upset forging. The upset forging temperature is too high or low. it is very easy to form crack on the protruding flat of the seal-cone while, but it can be avoided by warm upset forging process; on the other side, the forming of depressed zone is related to the asymmetrical distortion during upset forging.

关 键 词：高压油管 锥头 304L不锈钢 镦制 

分 类 号：TG316.16[金属学及工艺—金属压力加工]