检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]北京分子科学国家实验室,北京大学化学与分子工程学院,北京100871 [2]深圳市特种功能材料重点实验室,深圳大学,广东深圳518060
出 处:《物理化学学报》2006年第12期1451-1455,共5页Acta Physico-Chimica Sinica
基 金:国家自然科学基金(20573007)资助项目
摘 要:用旋转滴法测定了正负离子混合表面活性剂形成的双水相界面张力,研究了双水相界面张力与表面活性剂的分子结构、正负离子表面活性剂的摩尔比、总浓度、外加无机盐及温度的关系.结果表明,双水相界面张力在一定正、负离子表面活性剂的摩尔比时属于超低界面张力范围.观察到三种界面张力曲线类型,第一类为摩尔比1∶1的两边的两条曲线,界面张力随过剩表面活性剂组分的比例增加而降低;第二类为一条跨过摩尔比1∶1的马鞍型曲线;第三类为位于摩尔比1∶1的一边的一条马鞍型曲线.界面张力曲线的类型主要取决于表面活性剂的分子结构,包括亲水基类型、疏水链长度及对称性.Interfacial tensions of the aqueous two-phase systems formed by cationic-anionic surfactant mixtures were measured using spinning drop method. The effects of surfactant structure, molar ratio of cationic surfactants to anionic surfactants, surfactant concentration, salt, and temperature on the interfacial tensions were investigated. It was shown that the values of the interfacial tensions of the aqueous two-phase were in the scale of ultra-low interfacial tensions at certain molar ratios of cationic to anionic surfactants. Three types of interfacial tension curves were observed. The first curve comprised two curves that were located on either side of 1 : 1 molar ratio, and the interfacial tension decreased with the increase of excessed surfactant component. The second one was a saddle-shaped curve that strode over the 1:1 molar ratio. The third type was a saddle-shaped curve that was located beside the 1:1 molar ratio. The types of interfacial tension depended on the molecular structure of the surfactants such as the hydrophilic groups and the lengths and symmetry of hydrophobic chains.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.231