微型燃机一次表面回热器全程通道三维数值模拟  

Three-dimensional numerical simulation of primary surface recuperator entire duct for microturbine

作　　者：王巍[1] 余红英[1] 黄钟岳[1] 宋勇[1] 

机构地区：[1]大连理工大学能源与动力学院,辽宁大连116024

出　　处：《大连理工大学学报》2007年第2期185-189,共5页Journal of Dalian University of Technology

摘　　要：基于层流假设,对微型燃机一次表面回热器(PSR)波纹状全程通道的换热特性和压力损失进行了三维数值模拟计算,并将模拟结果与经验公式计算结果进行了比较.数值模拟结果表明,一次表面回热器的换热特性和压力损失值与雷诺数及波纹的结构尺寸有关.换热特性随着雷诺数的增加、通道宽高比的减小而逐渐增强,阻力损失则随着雷诺数、通道宽高比的增加而明显增大.当回热器部分流量工作时,回热度升高.A numerical simulation of flow and heat transfer was conducted for a wavy entire duct of primary surface recuperator （PSR）. The results of three-dimensional numerical predictions were obtained based on the laminar flow assumptions and compared with the literature data by empirical calculations. The systematical numerical simulation research showed that the heat transfer characteristics and pressure drop were related to Reynolds number and various geometries. The heat transfer was slightly enhanced as increasing the Reynolds number and/or decreasing pitch-to-height ratio, while the pressure drop was obviously enlarged as increasing the Reynolds number and/or pitch-to-height ratio. Moreover, the efficiency of recuperator was improved with the flow rate decreasing.

关 键 词：三维数值模拟 一次表面回热器 换热特性 压力损失 

分 类 号：TK472[动力工程及工程热物理—动力机械及工程]