单组分可见光固化齿科正畸粘接剂力学性能研究  

Mechanical Properties of One-Component Visible-Light Curing Orthodontic Adhesive

作　　者：许乾慰[1] 姚畅旺[1] 葛永静[1] 

机构地区：[1]同济大学材料科学与工程学院,上海200092

出　　处：《化学推进剂与高分子材料》2007年第2期55-59,共5页Chemical Propellants & Polymeric Materials

摘　　要：研究无机填料、功能单体及牙齿表面酸蚀与否等因素对单组分可见光固化齿科正畸粘接剂剪切强度的影响。结果表明,无机填料羟基磷灰石(HAP)和功能单体4-甲基丙烯酰氧乙基偏苯三酸酐酯(4-META)的加入使正畸粘接剂的力学性能显著提高。以环氧613树脂为基质,4-META质量分数为7.5%,HAP质量分数为40%,正畸粘接剂的剪切强度值最大,达23.38MPa。The influence of inorganic filler, functional monomer, etching treatment of teeth surface, etc on the shearing strength of one-component visible-light curing orthodontic adhesive was studied. The results show that mechanical property of the orthodontic adhesive is enhanced remarkably by adding inorganic filler HAP and the functional monomer 4-META. The highest shearing strength （23.38MPa） of orthodontic adhesive can be obtained when the substrate is 613 epoxy resin, the mass fraction of 4-META is 7.5%, and the mass fraction of HAP is 40%.

关 键 词：可见光固化正畸粘接剂 剪切强度 功能单体 羟基磷灰石 

分 类 号：R783[医药卫生—口腔医学]