熔附条件对牙科复合树脂中α-Si_3N_4结构及形态影响研究  

Effect of fusing condition on structure and morphology of α-Si_3N_4 in dental resin composite

作　　者：李保泉[1] 张颖丽[1] 孙宏晨[1] 杨柏[2] 

机构地区：[1]吉林大学口腔医院修复科,长春130041 [2]吉林大学化学学院

出　　处：《现代口腔医学杂志》2007年第3期311-312,286,共3页Journal of Modern Stomatology

摘　　要：目的研究熔附温度和熔附时间对α-氮化硅晶须(α-Si3N4)结构及形态的影响。方法将α-Si3N4以250℃/h的升、降温速度升分别至500℃、650℃、800℃、950℃和1100℃并分别保持10min、30min和3h制作试样,进行结构及形态测试。结果α-Si3N4晶须经不同烧结温度和烧结时间处理后,晶型、表面的化学基团和形态未改变。结论熔附条件对α-Si3N4晶须结构、表面的化学基团及形态无影响。Objective To evaluate the effect of fusing temperature and duration on structure and morphology of α-Si3N4 in dental resin composite. Methods The α- Si3N4 samples were treated by increasing and decreasing the temperature to 500℃, 650℃ , 800℃, 950℃ , 1100℃ at the rate of 250℃/h and maintained for 10min, 30min, 3h respectively, and then their structures and morphologic characters were investigated with Fourier transform infrared spectroscopy （FT - IR）, X - ray diffraction （XRD） and scanning electronic microscope （SEM）. Results The crystalline structure, chemical group and morphology of α- Si3N4 whiskers were not changed during being sintered by different temperature and duration. Conclusion Fusing condition had no influence on the structure, chemical group and morphology of α-Si3N4 whiskers.

关 键 词：α-氮化硅晶须 熔附条件 结构 形态 

分 类 号：R783.1[医药卫生—口腔医学]