注射成型氧化铝陶瓷工艺研究  

STUDY ON THE INJECTION MOLDING TECHNOLOGY FOR Al_2O_3 CERAMIC

作　　者：雅菁[1] 刘志锋[1] 赵丹[1] 周彩楼[1] 辛颖[1] 刘超[1] 

机构地区：[1]天津城市建设学院,天津300384

出　　处：《中国陶瓷》2007年第5期14-18,共5页China Ceramics

基　　金：天津市自然科学基金;编号:05YFJMJC04800

摘　　要：研究了氧化铝陶瓷注射成型工艺过程,包括粘结剂的选择、粉末装载量的确定及热脱脂工艺的研究。探讨了注射压力、注射温度和模具温度等注射成型工艺参数对试样性能的影响,得到了一条优化的氧化铝注射成型工艺路线。The process of alumina ceramic injection molding was investigated parameters such as the choice of binder system, the powder loading and the debinding And, the effect of the injection molding parameters such as the molding pressure, mold temperature on the performances of samples was discussed. Finally, a successful for the alumina ceramic was obtained. thoroughly. The mixing technology were studied. molding temperature and injection molding process

关 键 词：氯化铝 注射成型 粘结利 脱脂 

分 类 号：TQ174.02[化学工程—陶瓷工业]