半空心铆钉自冲铆接的工艺参数及铆接质量的判定  

Process Parameters and Joint Evaluation of Self-Piercing Riveting with Half-Hollow Rivets

作　　者：万淑敏[1] S.Jack Hu 李双义[1] 张连洪[1] 刘秀全[1] 

机构地区：[1]天津大学机械工程学院,天津300072 [2]密西根大学机械工程系

出　　处：《天津大学学报》2007年第4期494-498,共5页Journal of Tianjin University(Science and Technology)

摘　　要：自冲铆接是在板料和铆钉之间形成连接而不需要预冲孔的新工艺.探讨了检测自冲铆接质量的直接试验法和观测法,并在原有观测法的基础上提出了补充意见.开展了模具设计、铆钉尺寸选择及二者与板料匹配等方面的研究,提出了模具设计的依据和方法.同时进行了自冲铆接效果的试验研究,结合自冲铆接试验结果,分析了模具、铆钉以及板料的材质性能等因素对铆接质量的影响.研究和试验分析表明,自行设计的半空心铆钉和模具可以获得良好的铆接质量,可作为模具设计的参考和依据.Self-piercing riveting （SPR） is a new process without drilling holes between two panels. Direct test method and visual approach were discussed and supplementary opinion was brought forward based on the visual approach. Issues such as die design, rivet dimension selection and their matching with the panels were researched. Thus reference and method of die design was put forward. The SPR rivet quality test was done. And based on the test results, the influence of the die, rivet, and the material property of panels on the rivet quality was analyzed, which shows that the process parameter design method is effective, and can be used as reference for die design.

关 键 词：连接工艺 自冲铆接 模具 汽车轻量化 

分 类 号：U671.85[交通运输工程—船舶及航道工程]